User`s manual

Network Video Recorder User’s Manual
Following is captured setting of TX module configuration in the FW-3440, when
it is set up as Active mode.
 Note
NVCP port at NDVR server side should be opened to internet so that
FlexWATCH
TM
server can connect the NDVR server. If NDVR and FlexWATCH
TM
server is
in the LAN network, user does not need to configure NVCP port. But if either of them is in
the WAN network, NVCP port must be opened to internet so that video can be
transmitted to NDVR server.
6.2.3 Using AOIP server
Following is captured setting when the server is configured as Passive mode.
MAC address of Vs Module(Network camera or video server) should be type in to
authenticate access by FlexWATCH
TM
server. If MAC Address is not for the selected model,
Seyeon Tech Co., Ltd
43