User`s manual

Network Video Recorder User’s Manual
port and Pass word must correctly be configured.
Following is captured setting of TX module configuration in the FW-3440.
 Note
NVCP port should be open to communicate with NDVR Server, when the FlexWATCH
TM
server is programmed to be Passive mode.
6.2.2 Passive Mode
Following is captured setting when the server is configured as Passive mode.
MAC address of Vs Module(Network camera or video server) should be type in to
authenticate access by FlexWATCH
TM
server. If MAC Address is not for the selected model,
no connection can be established.
NVCP Password for FlexWATCH
TM
server must correctly be configured.
Seyeon Tech Co., Ltd
42