User`s manual

Network Video Recorder User’s Manual
FW-5400 Series = FW-5440
VS Module ID: Select “0” for any selected Video Server module, number 1 ~ 15 is for
video expansion in each video server in the future expansion.
NVCP Port : Type in NVCP port number configured in the network camera or video
server.
NVCP Password : It is security feature reside in the FlexWATCH
TM
server which
authenticate server access by RX module (FW-5440 or 5000 NDVR server) to
FlexWATCH
TM
server. Once NVCP Password is configured, that password must be set up
in the NDVR server to get video from FlexWATCH
TM
server. Otherwise, no video
connection can be established between NDVR and FlexWATCH
TM
server .
4) Once configuration is done, click “Apply” button.
6.2 Rx Module Registration Example
Some of configuration example for Rx Module Registration is provided to get more clear
idea about Rx Module Registration.
6.2.1 Active Mode
Following is captured setting when the server is configured as Active.
IP address of Vs Module(Network camera or video server) should be static and NVCP
Seyeon Tech Co., Ltd
41