User`s manual

Network Video Recorder User’s Manual
6 Rx Module Registration
Video proxy function is supported by NDVR server such as FW-5440 and FW-5000
servers. By registering networked FlexWATCH
TM
network camera or video server into
NDVR server, video recording can be done in the NDVR server and live view can be
accessed through NDVR server web page which means user does not need to separately
run web browser to view live view from respective cameras from FlexWATCH
TM
video
servers.
Rx module registration is to set up the FlexWATCH
TM
server to communicate with FW-
5440 or FW-5000 NDVR server. When TX module is enabled at the FlexWATCH
TM
server,
RX module at NDVR server side should also be enabled as well.
6.1 Rx Module Connection type
More than anything else connection type must be decided to set up the configuration.
Depending on which connection type is set up, TX module registration will be decided.
4 different modes are provided as a connection type. Depending on which device tries to
establish the connection to the other party, the connection type will be decided.
Active Mode : NDVR server tries to establish connection to FlexWATCH
TM
server.
When Active mode, FlexWATCH
TM
server must be set up as Passive mode
Using AOIP server : FlexWATCH
TM
server is connected to AOIP server which is IP
gateway for Dynamic IP users.
Local(Built-in) : Not user definable.
Passive Mode : FlexWATCH
TM
server tries to establish connection to NDVR server
When Passive mode, FlexWATCH
TM
server must be set up as Active mode
Following is recommended setting guide for TX and RX module for FlexWATCH
TM
server
Seyeon Tech Co., Ltd
38