User`s manual

Network Video Recorder User’s Manual
System Configuration
System configuration is to set up basic functions which helps you properly run and
manage the system. It is highly recommended to set up the configuration before any
other configurations. Following functions are provided in the System configuration mode.
- System name and Info
- System Administration account set up
- System access level setting
- Serial port configuration (Modem or Console device connection)
- RX Module Registration
1 System Information
System information is very important one
Following menu will be provided
Server Name User definable and Identifier of the system when the system is
accessed by third party program such as NDVR software.
Serial Number Product serial number. This information must be submitted for RMA
or Warranty claim
Model This information also needs to be submitted for technical support
request
Version System firmware version. This information also needs to be
submitted for technical support request
2 Date & Time
Date & time is very important factor to trigger any service at the right time such as FTP,
e-Mail, Alarm notification etc. If Date & time is not correctly set up in the system,
any service which will be triggered by schedule will be not done correctly.
Also Server Date & time info will be displayed on the image. If you need to display
correct time, please set up more accurate time information.
2.1 Date & Time in the server clock
Date & time can be set up in the real time clock built in the server. Simple set up Date &
Time info in the Date & Time configuration field.
1) Go to Date & Time setup menu in the System configuration section of Admin mode
2) Set the correct time and click “Apply” button
Seyeon Tech Co., Ltd
33