User`s manual

Network Video Recorder User’s Manual
3 Factory Default
Please refer to the following factory defaults to change setting up.
Factory Default
Admin ID root
Admin password root
IP address 10.20.30.40
Network mask 255.255.255.0
4 IP Assignment
FlexWATCH
TM
server can be configured by two different configuration method and
following is brief explanation.
Installation Wizard Program:
IP installation program is provided in CD form. Once FlexWATCH
TM
server is connected to
LAN network, you can assign IP address through program and access the Web browser
HyperTerminal mode:
If no network is available and you want to set up IP address, you can directly connect
FlexWATCH
TM
server to your PC through Serial cable provided together with product.
HyperTerminal mode is very useful tool to recover Admin password when you lost your
admin password or to report any problem to Manufacturer when product is on
malfunction status.
4.1 Hardware Configuration.
FlexWATCH
TM
NVR server has two different method of network configuration than other
models due to the built-in Router function. Thus, users are requested to read carefully
this papers before installation.
Only WAN port is to be used when you assign new IP for FlexWATCH
TM
NVR server. LAN
Port is to build up separate local network under built-in Router. Thus, you need to
connect LAN cable from your existing LAN network or from cable or DSL modem
you have to
WAN port of the server
Seyeon Tech Co., Ltd
21