User`s manual

Network Video Recorder User’s Manual

Rear Panel View

A B C D E

A WAN LAN Port for 10/100M Base T Auto sensing. LAN, Cable or

DSL modem should be connected to WAN port.

B Aux RS-232 Port to connect Serial input device, Voice kit, PTZ

device or Modem. Modem must be connected to Aux Port

only. Console for Hyper Terminal is not supported by this

port.

C LAN LAN Port for 10/100M Base T Auto sensing. This is for sub-

Local LAN network built-up under the NDVR router

D COM RS-232 port to connect , serial input device, Voice kit, PTZ or

Console for Hyper terminal. Console for Hyper Terminal

must be connected to this port only. No Modem is

supported.

E DC12V DC 12V power

Seyeon Tech Co., Ltd