User`s manual

Network Video Recorder User’s Manual
[Details of LED Part]
Menu Description
Name
Description
A Power ON/OFF
Switch
To turn on/off the power
WARNING! You must turn off the Power using this Switch
when you turn off the unit. Otherwise HDD can be damaged
by sudden power shut down.
B PWR LED To show Power status
LED will turn RED when the power is on.
C STATUS LED To show recording status and power shut down status.
When [Recording Status] is on Running, LED turns ORANGE
color. When turn off the power, It blinks and disappear.
D LAN LINK To show Local LAN connection status connected to LAN port
of the server.
When LAN is physically connected, Green LED is turned on.
E LAN (Tx/Rx) To show LAN data transaction status
When there is data transaction, it will be blinking
F WAN Link To show WAN connection status connected to WAN port.
G WAN(Tx/Rx) To show LAN data transaction status
When there is data transaction, it will be blinking
H RECORDING To show Recording status
When recording, REC LED blinks.
I HDD LED To show HDD access When the NVR Server access the HDD
(for recording and playback), Green LED is turned on.
J HDD Cartridge Hard Disk Drive Cartridge.
WARNING! When you detach HDD, you must turn off Power
before proceeding.
K HDD PWR LED To show HDD power status.
When PWR is on, Green LED will blinks
L HDD Function
LED
To show HDD function status.
When recording or playback is done, Green LED blinks.
M Hard Disk Lock Hard Disk Drive Lock. To record video, it must be
securely locked. Otherwise, No video will be recorded.
Seyeon Tech Co., Ltd
13