User`s manual

Network Video Server User’s Manual

Seyeon Tech Co., Ltd

4.2.2 Alarm output device through Admin Page

Alarm output device can manually be controlled through Admin page of the system.

This option is recommended when web browser based alarm output control panel is

hided and administrator want to manually control Alarm output device.

1) Run Admin configuration panel

2) Click Alarm output control option in the Service configuration mode

3) Check the alarm output port and click “Apply” button

4.3

Automatic Control of Alarm Output device

Alarm Output device can automatically be controlled by setting up control condition

properly. This is to automatically to activate alarm output or any relay output device

connected to the server.

Up to three different conditions per alarm output port with schedule, Sensor or its

combination is provided so as to set up powerful and various working condition for each

alarm output device.

1) Go to Advance service option in the Service configuration mode in the Admin window.

- INTPLUS [2005] -