User`s manual

Network Video Server User’s Manual
Seyeon Tech Co., Ltd
77
7) Select the installed Serial Input Device Model on the dropdown menu as above.
8) Click ‘Apply’ button.
) Note
Serial Input device protocol can separately be uploaded into the system per customer
needs. User can upload serial input device protocol file which is provided by
manufacturer only.
This function is not for general use. Thus, if you need more close information about this,
please contact your local distributor or manufacturer for further information,
[e-mail]
.
2.3 Serial output device
The system supports to relay third party command to target device through Serial
output device control mode. Through this, user defined message can be reached to
target device
The system supports two different modes. One is X10 protocol for PLC (Power Line
Communication) and UART(Universal Asynchronous Receiver Transmitter) device.
2.3.1 Serial Output Configuration
Following is guide for hardware cabling and setting.
1) Connect your Serial Input Device to COM port
- INTPLUS [2005] -