User`s manual

Network Video Server User’s Manual
Seyeon Tech Co., Ltd
76
2 Installation & Configuration of External Device
2.1 Console (Hyper Terminal cable connection)
Console has to be connected to COM Port with RS-232 Serial cable.
1) Connect COM1 or COM 2 Port at your PC and COM Port at FlexWATCH
TM
server with
RS-232 Serial cable.
2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration
3) Select ‘Console’ at COM mode, and Click ‘Apply’ button
4) System reboot will be recommended, then click ‘Reboot’ button.
2.2 Serial Input device
Serial input device such as Car Speed sensor, BOG sensor, POS (Point of sales), ATM
device which communicate with external device through RS-232 interface can be
integrated with the system. And that data can be transmitted along with video to
anywhere over the TCP/IP network.
1) Connect your Serial Input Device to COM port.
2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration
3) Select ‘Serial Input’ at COM mode, and Click ‘Apply’ button.
4) System reboot will be recommended, then click ‘Reboot’ button.
5) After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports
Configuration
6) Click “Serial Input Mode”, then following window will show up.
GND Tx
COM,DIO port
8 7 6 5 4 3 2 1
- INTPLUS [2005] -