User`s manual

Network Video Server User’s Manual
Seyeon Tech Co., Ltd
67
3.3 VDCP Port configuration
VDCP port is UDP port for Voice Communication. By changing VDCP port (Default
number is 32001), you can install more than one Voice kit and Video server
under the router.
Note that when Voice Kit is connected to Internet, respective UDP port of the
router must be opened.
4 WAN Configuration and Application
Server is designed to make a call to ISP or can receive a call from outside so that server
can establish Internet connect to send FTP, e-mail or send video & data through PSTN
line or other medium. This is best alternative when the broadband Internet access is not
available.
4.1 External Modem connection
Modem has to be connected to COM port with RS-232 Serial Cable.
1) Connect your MODEM and COM Port at FlexWATCH
TM
server with RS-232 Serial cable.
2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration
3) Select ‘Modem’ at COM mode and click ‘Apply’ button.
4) System reboot will be recommended, then click ‘Reboot’ button.
4.2 Application with Dial-in/out feature
4.2.1 Application with Dial-in
- INTPLUS [2005] -