User`s manual

Network Video Server User’s Manual
Seyeon Tech Co., Ltd
57
A. Option to allow system access without system Login ID & PW
B. Channel based different user account creation
C. Different control authority for Video, PTZ, Audio, and relay output device
control
4.1 Full Access
To allow system access by anyone who know the IP address. PTZ, Audio and Relay
output device can be controlled by anyone. Thus, if security for video is important, it is
highly recommended to user limited access mode below
4.2 Limited Access and User registration
This is to limit server access to the authorized user only. Through this mode, you can
create multi level access account for each camera, not system level, with different
control authority.
Once Limited Access option is selected, User registration should be followed to
effectively use Limited Access function.
) Application Tips
If servers are accessed and controlled by third party application program and if
you want to give different control authority for each camera to different application
program, you can give different access and control authority for PTZ, Audio, Relay
output device control for specific camera by creating different User account in the server.
Following is step for Limited access account for each camera.
1) Select [Limited Access] option in the Access Permission menu
2) Click [Apply] button
3) Click [user registration] menu in the System configuration section of Admin
window
4) Fill out the column provided such as User name, ID & Password
5) Select the Camera module for which you would like to give permission and check
control item such as Alarm control, PTZ, and Audio control.
- INTPLUS [2005] -