User`s manual

Network Video Server User’s Manual

Seyeon Tech Co., Ltd

flexibly filter out motion area.

3.3.1 Setting procedure

1) Go to “Camera & Motion” option in the Admin Menu

2) Select the camera for video configuration

3) Click “Select Area” button from the Camera configuration menu

4) Click the square block to set up motion detection area

5) Adjust Motion sensitivity (the lower the number, the higher the motion

sensitivity)

6) Check “Motion Enable” check box and Click “Apply” button to save your

configuration

3.3.2 How to save Motion triggered image in the NVR solution

Recording in the FW-5440/5000

Simply check “Motion Detection” option in the recording condition menu in the FW-

5440 or FW-5000 when motion detection option is enabled in the FlexWATCH

server.

- INTPLUS [2005] -