User`s manual

Network Video Server User’s Manual
Seyeon Tech Co., Ltd
46
Speed (1~20) : To set the camera speed while it’s running from one position to another.
Recommended speed is about 10 for appropriate operation.
Time (1~20) : To set the camera dwelling time between the preset position when the
group mode is enabled. The time unit takes about 3 seconds. Thus, if we select 2 in the
time setting PTZ will stay about 6 seconds.
2) Choose ‘Group No.’ and click ‘Start Set’.
3) Set ‘Speed & Time’ and select the first position No. from among you assigned at
Preset Position set-up.
4) Set ‘Speed & Time’ again and select the second position No.
5) After setting in order up to 6 positions, then click ‘Save Set’ and ‘Close’ button.
6) Total 6 Groups can be arranged by the same way explained above.
1.6 Tour set-up
Once you arranged a number of Groups, then they can be chained into Tour.
1) Click ’Tour set’ button, then below window will pop up.
- INTPLUS [2005] -