User`s manual

Network Video Server User’s Manual
Seyeon Tech Co., Ltd
100
event and only pre/post alarm buffered image can be sent to FTP server.
1) Go to Advance Service menu in the service configuration mode and select
Buffering Service option
2) Set up Pre alarm buffering configuration for FTP service
3) Set up FTP directory and file name option
4) Select the camera and set up FTP condition for each camera. Up to 3 different ftp
condition can be set up for each camera.
4.2.2 Periodic FTP service
Periodic FTP means that image will continuously be sent to FTP server when there is any
event. No pre/post alarm image will be sent to FTP server.
1) Go to Advance Service menu in the service configuration mode and select None
Buffering Service option
2) Set up FTP directory and file name option
3) Select the camera and set up FTP condition for each camera.
 Application idea
If server is connected to dynamic IP or Private network and you want to continuously
send image to FTP server, please use Overwrite function in the Periodic FTP service.
5 Alarm Buffering Service
Pre/Post alarm image can be stored in the system memory so that user can remotely
connect the server and playback stored image at any time.
5.1 Alarm Buffering Service Configuration
1) Go to Advance Service menu in the service configuration mode and set up system
memory assignment for Alarm Buffer service.
2) Select “Buffering Service” option and check whether Pre Alarm buffer size is
already assigned. Otherwise, assign pre alarm butter size
3) Select “Alarm Buffer Service” from the listed option
4) Enable the Alarm buffering service.
- INTPLUS [2005] -