User`s manual

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
63
please contact your vendor or manufacturer for more information, [e-mail]
4.4 Dial-in Configuration
Dial-in is to allow client PC to call into the server and get live video through PSTN line.
Overall configuration is very similar to that of Dial-out configuration. But much more
simple than Dial-out.
1) Go to [WAN (PPP, Modem, etc)] menu in the Network configuration mode.
2) Select “PPP Server”. This is to authenticate incoming call to server from remote client.
3) Check Authenticate more as none.
4) Configure User ID and Password, if you need to set up authenticate mode
5) Click [Apply] button and quit configuration menu.
Local IP address and Remote IP address
When remote client is connected to the server through modem connection, physical line
connection will be done. But no way to view live video unless client runs the web browser
of the FlexWATCH
TM
server.
Local IP address and Remote IP address is virtual IP address which is used at the time of
Modem connection only
- INTPLUS [2005] -