User`s manual

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
19
2.2 Hardware Description
2.2.1 FW-1110 & 1110W Hardware Description
Front Panel View
A PWR LED Indicate power on/off
Always red-light on when turned on
B LAN LED Blinking only when LAN is connected to the network
Green-light on when LAN connection is OK
C Camera Control
Switch
To adjust camera quality. Please refer to below description for
more details.
D Level Control To adjust voltage level of DC iris lens. if the screen is too brig
ht or dark, one needs to adjust the volume knob on the rear
panel until the optimal status is reached."
Camera Control Switch
FLK (Flickerless) Switch (OFF/ON)
This function is used for removing flicker, when camera signal format does
not coincide with power source frequency being used
.
AGC Switch(OFF/ON)
The auto gain control switch allows the video signals to maintain a constant level. This
switch is useful when using the camera at low-light levels and when lighting level
changes over time. For best low light conditions, this switch should be set to ‘ON’mode.
BLC(Backlight Compensation OFF/ON)
A B C D
- INTPLUS [2005] -