User`s manual

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
70
A. By-pass command string from third party
This is to send command string from third party application program to the target
device connected to the server. More about this function can be supplied by HTTP CGI
API guide.
B. Control panel inside of the system
You can create control panel of external device inside of the server and control target
device through server web page.
This function is not for general use. Thus, if you need more information about this, please
contact your local distributor or manufacturer for further information,
[e-mail]
.
2.4 Voice Kit Connection and configuration
G.723.1 which is international standard for VOIP (Voice Over IP) communication based
FW-V10s voice kit can work with FlexWATCH
TM
server and you can enjoy not only live
video stream but also full duplex two real time Voice through web browser or proprietary
application program.
Voice broadcasting for voice connection by multiple users is also supported by the system
as well.
) Note
Once Multi user connection is enabled, only root Account user can enjoy full duplex audio
and rest of users can listen only.
1) Connect RS-232 Serial Cable with FW-V10S to COM port of FlexWATCH
TM
server.
Serial cable is provided with FW-V10S. Refer to PIN out diagram above.
2) Connect RS-232 Serial Cable to FW-V10S.
3) Go to Admin Menu >> System Configuration >> Serial Ports Configuration.
4) Select ‘Voice’ at AUX mode, and click ‘Apply’ button. Please note that Voice kit has to
be connected to COM Port (through RS-232) only.
5) System reboot will be recommended, then click ‘Reboot’ button.
6) After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports
- INTPLUS [2005] -