User`s manual

Network Camera Server User’s Manual

Seyeon Tech Co., Ltd

A. Firstly it is required to assign an IP address for the LAN port connection.

(It’s the same procedure of IP assignment for FW-1110L’s LAN port connection.)

B. After that, through the LAN port connection, you can access to ‘Admin menu’ of

FW-1110LW on your web browser and assign another IP address for its Wireless

LAN connection. (Refer to the end of this chapter, page 32.)

4.1 Through Installation Wizard Program

IP setting with Installation Wizard program is easy and simple way and after IP setting is

done you can do other configuration through web browser.

You can use IP Installation Wizard Program as following steps.

(IPInstallationWizard.exe is provide in the product CD)

Preset a PC with Microsoft Windows O/S.

1) Connect FlexWATCH

server into the network (Hub) that your PC belongs to.

2) Run the IP installation Wizard program in your PC. Then following IP Installation

Wizard window will show up.

- INTPLUS [2005] -