Network Camera Server User’s Manual User’s Guide FlexWATCHTM 1110/1110W (Version. 3.0_Rev1) Seyeon Technology Co., Ltd www.flexwatch.com www.intplus.es Seyeon Tech Co.
Network Camera Server User’s Manual 2 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Table of Contents Overview of FlexWATCHTM Server .......................................................... 10 1 Packing List.............................................................................................. 10 2 What is FlexWATCHTM? ............................................................................... 11 2.1 Key Function of FlexWATCHTM .............................................................. 11 2.2 Product Specification ....................
Network Camera Server User’s Manual 1.2 Java Applet based live view ................................................................ 39 1.3 Simple viewer page guide................................................................... 39 2 FW-Voyager based view and recording ......................................................... 41 3 Camera configuration ................................................................................ 41 3.1 Camera value string configuration...............................
Network Camera Server User’s Manual 3 Network port configuration ......................................................................... 59 3.1 HTTP port configuration...................................................................... 59 3.2 NVCP –Tx Port .................................................................................. 59 3.3 VDCP Port configuration ..................................................................... 60 4 WAN Configuration and Application .........................
Network Camera Server User’s Manual 4 Alarm Output(Relay output) device connection .............................................. 77 4.1 Alarm output device connection........................................................... 77 4.2 Manual control of Alarm output device.................................................. 78 4.3 Automatic Control of Alarm Output device............................................. 79 Advanced Service configuration ............................................................
Network Camera Server User’s Manual 3 Factory Default ....................................................................................... 105 4 System Update ....................................................................................... 106 4.1 Description of files system ................................................................ 106 4.2 Update Procedure............................................................................ 108 7 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Notice • The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Seyeon Tech assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. • Seyeon Tech reserves the right to make changes in the product design without reservation and without notification to its users.
Network Camera Server User’s Manual Warning To prevent risk of electric shock, Do not remove system-case. No user serviceable parts inside. Any repair or modification for the product will be allowed to qualified service personal only. Do not expose this appliance to water or moisture. Do not install this product in Hazardous areas where highly combustible or explosive products are stored or used.
Network Camera Server User’s Manual Overview of FlexWATCHTM Server 1 Packing List Please check and make sure following items are included in your package without any missing items. If there are any missing items, please refer to your local distributor. A. FlexWATCHTM 1110 or 1110W…………………………………………………….1unit B. RS-232 Serial cable…………………………………………………………………..…1unit (Cross cable DB9 Female) C. Power Adapter…………………………………………………………………………..….1unit (Power Cable, SMPS DC 12V Adapter) D.
Network Camera Server User’s Manual What is FlexWATCHTM? The FlexWATCHTM server is the Network camera Server, which transmits digital images captured by Analog CCD camera over the Internet. So users can view real-time live images over the Internet at anytime and anywhere using the standard web browser such as MS Internet Explorer or Netscape Communicator. There is no need other specific software to view real-time live images over the Internet.
Network Camera Server User’s Manual 12 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual 1.2 Product Specification Hardware · Built-in Motion detections (Up to 144 blocks) · 32bit Embedded CPU · e-mail, FTP, alarm Buffer by event or schedule · Flash 4Mbytes /SDRAM: 32Mbytes · IP notification, Alarm Notification to e-mail, CGI path by event or schedule · Hardware Motion JPEG engine · Linux version 2.4.xx operating system PTZ & UART Control System Requirements · OS : Win 95/98/2000/XP/NT/ ME, Linux, Mac, Unix, Linux · Browser : MS IE( 5.
Network Camera Server User’s Manual · AVI conversion tool support by FW-voyager · Work with FW-Manager NDVR S/W · Dynamic IP support through AOIP 1.3 Basic Network Connection Diagram FlexWATCHTM server provides flexible connectivity with any type of networks available around you such as Leased line, Cable modem, xDSL line and PSTN (POT) line. Thus, it can be installed either in LAN or WAN environment as long as there is network available.
Network Camera Server User’s Manual 1.3.3 Dynamic IP address from Cable or xDSL line FlexWATCHTM server can be installed on even Dynamic IP network. But it needs to be registered in AOIP server which is an IP gateway running by Flexwatch.com or your local Distributor. For more details, please refer to Technical guidebook in the CD manual. 1.3.
Network Camera Server User’s Manual your local Phone line based Internet connection. 1.3.5 Dial-in to FlexWATCHTM server through PSTN line You can make a call to FlexWATCHTM server from anywhere and at anytime. But if you are concerned about call charge, we are recommending using above connection. 1.
Network Camera Server User’s Manual 17 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual 2 Hardware Description • This chapter contains list of items to be prepared for the installation of FlexWATCHTM server. • Please carefully read this chapter before the installation. • Please prepare all the necessary items before start installation to prevent any possible malfunction or any other hazard can be happened during the installation. 2.1 Caution and observance • Keep the device in the clean and dried area where air ventilation is guaranteed.
Network Camera Server User’s Manual 2.2 Hardware Description 2.2.1 FW-1110 & 1110W Hardware Description Front Panel View AB A PWR LED B LAN LED C Camera Control Switch Level Control D C D Indicate power on/off Always red-light on when turned on Blinking only when LAN is connected to the network Green-light on when LAN connection is OK To adjust camera quality. Please refer to below description for more details. To adjust voltage level of DC iris lens.
Network Camera Server User’s Manual Under bright background lighting condition, the object appears dark. But in the BLC 'ON' mode, you can obtain a clean picture. ELC(ON/OFF) When set to ‘ON’ mode, the electronic iris switch automatically varies the camera's shutter to mimic auto-iris control, allowing fixed or manual iris lens to be used in a wider range. When this switch is set to ‘ON’ mode, set the FLK switch to ‘OFF’ mode. When a manual iris lens is mounted on camera, set ELC switch to ‘ON’ mode.
Network Camera Server User’s Manual Auto Iris Lens interface Only DC Iris lens can work with FlexWATCHTM server. If you are going to use DC auto iris lens acquired in the market place, please following the connector assembly guide below. ) Notice a. set the ELC switch in the front panel to 'OFF' b Please check the pin number on the surface of auto iris lens connector Pin Number DC Iris Lens 1 2 3 4 CONTROL( - ) CONTROL( + ) DRIVE( + ) DRIVE( - ) 21 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual IP assignment 1 Key Words for Network LAN (Local Area Network) : Under the LAN network, any network device in the same LAN network can be accessed by any other network device. But LAN network can not be accessed from the Internet (WAN). Most of case, LAN is built after Router which is connected to WAN network so that Network device in the local area network can access to the Internet through Router.
Network Camera Server User’s Manual Dynamic IP address : A dynamic IP address is an IP address that is automatically assigned to a client station (computer, network equipment, etc.) in a TCP/IP network. Dynamic IP address is typically assigned by a DHCP server, which can be a computer on the network or another piece of hardware, such as router.
Network Camera Server User’s Manual LAN is never transmitted on the Internet. AOIP (Always On Internet Protocol) Server: AOIP™ server (Always On IP) is run by Seyeon Technology or its business partner and is a gateway for remote users to access FlexWATCH™ servers which is connected dynamic IP address over DSL,Cable modem and PSTN network over the Internet.
Network Camera Server User’s Manual network. \ C:\> ipconfig Windows 2000/XP IP Configuration Ethernet adapter Local area connection : Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.0.158 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 C:\> With above info, you can get information about your network from your PC and see which IP class of IP address should be assigned to FlexWATCHTM server.
Network Camera Server User’s Manual Reply from 192.168.0.155: bytes=32 time=10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 2.1.2 DHCP Enabled PC If your PC is set to use DHCP, you need to check out IP address of your PC using ‘ ipconfig’ command at DOS Prompt window. You need to get IP address from your network administrator to assign it to FlexWATCHTM server.
Network Camera Server User’s Manual over cable. 2.2.1 LAN Cable Environment If your PC is connected to network through LAN cable, you need to connect FlexWATCHTM server to LAN port of Hub or Router. 2.2.2 Cross-over cable If LAN network is not available, you can directly connect FlexWATCHTM server to your PC through Cross-over cable.
Network Camera Server User’s Manual 2.3 PC Environment Check out whether your PC is connected to LAN or WAN network or stand-alone. If stand alone, you need to use Cross-over cable or build up LAN environment to use LAN cable. 3 Factory Default Please refer to the following factory defaults to change setting up. Factory Default Admin ID Admin password IP address Network mask root root 10.20.30.40 255.255.255.
Network Camera Server User’s Manual (It’s the same procedure of IP assignment for FW-1110L’s LAN port connection.) B. After that, through the LAN port connection, you can access to ‘Admin menu’ of FW-1110LW on your web browser and assign another IP address for its Wireless LAN connection. (Refer to the end of this chapter, page 32.) 4.
Network Camera Server User’s Manual Description of Window Menu Description A Serial No. (MAC Address) of System B IP Address on PC Enter FlexWATCHTM server Serial No. (Mac address) attached at the bottom of the unit and select the LAN port. WAN PORT is only for setting up FW-5000 and FW-5440 model which has two LAN Card inside of the box. Auto scanned IP address of user’s computer with IPInstallationWizard.exe running on.
Network Camera Server User’s Manual ------------ Set Server IP Address -----------ARP: Adding static entry to ARP table [ OK ] Ping: Trying ping 10.10.225.100 [FAILED] Please check whether IP address and MAC address is valid. Then, please retry again. ARP: Deleting static entry from ARP table [ OK ] If IP address setting is failed, please check whether correct IP/MAC address is entered. - And try again with correct IP/MAC address, or please use HyperTerminal method. If the above result is O.K.
Network Camera Server User’s Manual 2) Run Hyper Terminal Program on user’s PC. Window start> Program> Accessories> Communication> Hyper Terminal 3) If Hyper Terminal window come up as below, input HyperTerminal name (ex. Flexwatch) and press ‘OK’ button. 4) Select the connected COM port with serial cable and press OK button. 5) When ‘Port Settings’ window show up, input each values from the table below. 32 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Serial Port Settings Bits per Second Data bits Parity Stop bits Flow control Value 115200 8 None 1 None 6) After setting Hyper Terminal, press Enter key several times and then you can see messages as below. Input Login ID and Password. (Factory defaults for Admin ID and Password are root/root.) Seyeon Tech Co., Ltd. 2001-2003 Linux Kernel 2.4.20-syl1 FlexWATCH login: 7) If you correctly input Login ID and Password, ‘bash#’ prompt will show up as below.
Network Camera Server User’s Manual bash# netconfig --------------------- Network(LAN) Setup --------------------Current configuation IP Address : 10.20.30.40 Network Mask : 255.255.255.0 Gateway : 10.10.1.1 Enter IP Address : 9) Input new IP address, Network Mask and Gateway values to be assigned to FlexWATCHTM server. After this, press “y” to apply the new network configuration. Enter IP Address : 10.10.213.22 Enter Network Mask : 255.255.0.0 Enter Gateway : 10.10.1.
Network Camera Server User’s Manual Bash# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:6F:81:00:AE inet addr:10.10.213.22 Bcast:10.10.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6382 errors:0 dropped:0 overruns:0 frame:0 TX packets:294 errors:0 dropped:0 overruns:0 carrier:0 collisions:2 txqueuelen:100 Interrupt:9 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.
Network Camera Server User’s Manual ) Note: SSID may also be referred to as "ESSID", and is case sensitive. 3) Select ‘Enable’, then input ‘SSID’, ‘IP address’ and ‘NetMask’. You need to input the same values registered on your Wireless Router (Access Point). And click ‘Apply’ button. Example) 4) Go to ‘Admin Menu’ => ‘Network Configuration’ => ‘Gateway Configuration’. 36 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual 5) Select ‘Wireless LAN’ and input ‘Gateway address’. It must be same as the ones registered at the Wireless Router (Access Point). And click ‘Apply’ button. 37 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Live view & Camera Configuration Once IP assignment is finished, you can view live view through standard web browser such as MS Internet Explorer or Netscape Navigator. There are two different type of viewing option provided by FlexWATCHTM server. One is simple live view and the other is “FW-Voyager” which provides personal Network DVR(Digital Video Recording) and viewing solution. Depending on the OS and web browser, you can get different viewing option as well.
Network Camera Server User’s Manual When the Client pc is not connected to Internet, you need to manually install ActiveX components in your viewing PC. - Insert the product CD in your PC - Select “FlexWATCHTM Simple Viewer control” program - Application idea ActiveX based SDK is provided for software developers so that application program developers can easily utilize digital video from FlexWATCHTM server for his own video application. 1.
Network Camera Server User’s Manual screen, snapshot, PTZ control, Relay output control, Voice kit connection as well. Module Selection : Not user selectable option field. Frame rate : You can adjust display frame rate by control Frame rate option Display size : X1 for Real size, x2 for double size and Full screen mode is supported. Snap shot : You can make a snapshot of video while viewing the live video.
Network Camera Server User’s Manual PTZ Control : PTZ(pan/tilt/zoom) device can be controlled through web browser. When click “PTZ” button, PTZ control panel will separately be appeared. But note that you need to get permission to control 2 FW-Voyager based view and recording FW-Voyager is web based DVR software for personal video recording. Using this free software, user can easily install the software and do video recording at any time.
Network Camera Server User’s Manual transmitted along with live video stream so that client program can receive and utilize video related value string for his own application. Default Video Format : To manually change video format.
Network Camera Server User’s Manual technical documentation for the programmer to decrypt value string for his programming. Thus, please contact your local vendor to get more in-depth technical info to decrypt the value string. 3.1.1 Image encryption Image encryption is security feature to prevent unwanted image hacking when anonymous user accesses the system. Once it is enabled, user must enter encryption code to view live video.
Network Camera Server User’s Manual and quality setting. User defined camera name will be appeared on the camera name column of video. Up to 20 different English characters can be used. ( Notice : If you are using 2-Byte Unicode Character, number of character is limited to 10 ) Image Size : 4 different size of video can be set up.
Network Camera Server User’s Manual Whether to enable video channel or not. If “Disable” is selected, camera will not be displayed. Video Source: color and Gray mode option Image Quality: 5 quality levels - highest, high, normal, low, lowest ) Note Please note that if you increase image size and quality, actual JPEG file size will be increased and this may affect actual transmission frame rate.
Network Camera Server User’s Manual configuration 3.3.2 How to save Motion triggered image in the NVR solution Recording in the FW-5440/5000 Simply check “Motion Detection” option in the recording condition menu in the FW5440 or FW-5000 when motion detection option is enabled in the FlexWATCHTM server. 46 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Recording in the FW-Manager To record motion triggered image in the FW-Manager (NDVR Software) client program, you should not use Software motion detection function in the FW-Manager. - Simply configure motion detection for the selected camera in the FlexWATCHTM server - Set up Motion based recording condition in the FW-Manager (Do not set up motion detection area in the FW-Manager software). 47 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual System Configuration System configuration is to set up basic functions which help you properly run and manage the system. It is highly recommended to set up the configuration before any other configurations. Following functions are provided in the System configuration mode.
Network Camera Server User’s Manual 1) Go to Date & Time setup menu in the System configuration section of Admin mode 2) Set the correct time and click “Apply” button 2.2 Date & Time using NTP server If multiple servers are installed over the network and controlled by client program and synchronized time info is required, use NTP(Network Time Protocol) option. 1) Go to [NTP setup] menu in the Network configuration section of Admin Mode 2) Type in NTP server name or use default NTP timeserver, ntp.ewha.
Network Camera Server User’s Manual A. Option to allow system access without system Login ID & PW B. Channel based different user account creation C. Different control authority for Video, PTZ, Audio, and relay output device control 4.1 Full Access To allow system access by anyone who know the IP address. PTZ, Audio and Relay output device can be controlled by anyone. Thus, if security for video is important, it is highly recommended to user limited access mode below 4.
Network Camera Server User’s Manual Full Access : If full access is selected, any body can access the server and control the video. No Access : This is to temporally restrict camera access by specific user without delete user account to temporally block access to the camera. Selective Access: This is to set up control authority for the respective or all cameras. VS Module ID is FlexWATCHTM server ID which is recognized by the server. Default # is 0.
Network Camera Server User’s Manual 5 Frame rate control Maximum Video frame rate which sever can transmit over the IP network can be set up through Frame rate control option. Through this maximum frame rate control option, user can limit network bandwidth consumption by video transmission. 1) Go to [Access Control] option in the system configuration menu in the Admin page. 2) Set up Maximum frame rate. Following table could be an example. File size is variable depending on the complexity of the scene.
Network Camera Server User’s Manual 6 Tx Module Registration(NVCP) ) - Notice If you do not connect FlexWATCHTM server to NDVR server, do not set TX module configuration - Once Tx Module configuration is done, set up RX module configuration in the NDVR server as well Video proxy function is supported by NDVR server such as FW-5440 and FW-5000 server.
Network Camera Server User’s Manual 1) Click TX Module registration menu in the System configuration mode of Admin window. 2) Type in NVCP Password in the NVCP Password configuration filed. ) Notice NVCP Password is security feature which authenticate server access by RX module (FW-5440 or 5000 NDVR server) to FlexWATCHTM server. Once NVCP Password is configured, that password must be set up in the NDVR server to get video from FlexWATCHTM server. Thus, you must make a note of NVCP password.
Network Camera Server User’s Manual 5) Once Active mode is selected, type in IP address of NDVR server.
Network Camera Server User’s Manual Network Configuration Network configuration mode provides interface for the server to be connected to broadband network or PSTN line. In addition to basic network, application port such as HTTP, NVCP, Voice port configuration and IP filtering options are provided. 1 Network configuration You can change IP address of server through LAN configuration mode. 1.1 Static IP Select this to assign static IP in the server.
Network Camera Server User’s Manual Once DHCP is enabled, there is not other setting to be changed in the network works configuration except DNS info, if required. 2.1.1.1 IP notification by E-mail service You can receive IP address of the server through e-mail from the server, when the server is connected to DHCP server. Please do not enable DHCP client feature till you open a way to receive or get IP address of server. 1) Check whether you are in the DHCP environment before starting set-up.
Network Camera Server User’s Manual configuration in Advanced Service 2.1.1.1 Server access through AOIP server Once Server is registered in the AOIP server and DHCP is enabled, you can access the server through AOIP server. IP address of server can be found from AOIP server as well. In this case you do not need to configure e-mail address setting to get IP address from the server.
Network Camera Server User’s Manual connection. ) Note Once PPPoE is enabled, LAN network setting will be disabled. 3 Network port configuration HTTP port, NVCP and VDCP ports are application port through which video and audio data can be transmitted over the TCP/IP network. 3.1 HTTP port configuration When you need to change Default HTTP Port (#80) to other port, you can change HTTP port. This is very useful when more than one server should be installed behind a router.
Network Camera Server User’s Manual 3.3 VDCP Port configuration VDCP port is UDP port for Voice Communication. By changing VDCP port (Default number is 32001), you can install more than one Voice kit and Video server under the router. Note that when Voice Kit is connected to Internet, respective UDP port of the router must be opened.
Network Camera Server User’s Manual Dial-in is to allow server connection from remote client. This option is useful for the user to connect the server at any time. Especially when the server sends e-mail notification for the alarm and user want to check the situation. 4.2.2 Application with Dial-out Server can establish the Internet connection through PSTN line and send FTP or e-mail when the alarm condition is triggered by any event.
Network Camera Server User’s Manual PPP Client : This means that FlexWATCHTM server acts as client and calls out to ISP. PPP Server : This means that FlexWATCHTM acts as a Server and receives a call from remote user. Tel#, User ID and User password : ISP phone number and user account for Internet connection to ISP. Default Route : Enable this option. When Dial-out option is selected. ) Note If you use external modem, we recommend ‘3COM U.S.
Network Camera Server User’s Manual please contact your vendor or manufacturer for more information, sales@flexwatch.com 4.4 Dial-in Configuration Dial-in is to allow client PC to call into the server and get live video through PSTN line. Overall configuration is very similar to that of Dial-out configuration. But much more simple than Dial-out. 1) Go to [WAN (PPP, Modem, etc)] menu in the Network configuration mode. 2) Select “PPP Server”.
Network Camera Server User’s Manual Local IP address : System default IP address (192.168.2.1) resides in the FlexWATCHTM server for modem connection only. So when you connect the FlexWATCHTM server from remote PC using dial-up networking and physical connection is made, you need to run your web browser and enter this system default IP address(192.168.2.1) to view live video. You can change this system default IP address as well.
Network Camera Server User’s Manual LAN : This is default path the send any data to outside. Modem : when PSTN or other medium than LAN is used to send data to outside. This service port must be checked when any data is to be sent through PSTN or other medium than LAN which is connected to COM port. ) Note Service path must be set up and checked before starting WAN configuration to send any data through external PSTN modem connection or equivalent If LAN is to be used, select “None(LAN)” option.
Network Camera Server - User’s Manual Once things are set up, you can login to AOIP server and connect your FlexWATCH™ server. ) Note AOIP is proprietary data service run by FlexWATCH™ or its business partners around the world. Thus, depending on the country AOIP service can run by your local vendor or master distributor or in some case, you need to user AOIP server run by manufacturer. More detailed information about how to use can be acquired by contact your local distributor or sales@flexwatch.com .
Network Camera Server User’s Manual FW-5440 and FW-5000, or Video proxy server supplied by FlexWATCHTM server. If not, do not enable this option. 7 Network Status You can see all the network status configured in the system through “Network status” option. Please Select “Network Status” menu in the Network configuration mode of Admin Window. 67 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual External Device connection & configuration External device such as Serial input device, Serial output (UART) device, PTZ (pan/Tilt/Zoom) device, Audio kit and Alarm input and output device can be connected to the system and controlled over the TCP/IP network. 1 Serial Ports Configuration Guide This chapter will guide you how to install and configure Serial-interface devices.
Network Camera Server User’s Manual 1.1.2 Ports Connection for using two different devices. Two different devices can simultaneously connected to the server and work together. Please refer to following port connection guide and use the right port to get the external devices worked with FlexWATCHTM server.
Network Camera Server User’s Manual RS-232 Serial cable. 2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration 3) Select ‘Console’ at COM mode, and Click ‘Apply’ button 4) System reboot will be recommended, then click ‘Reboot’ button. 2.2 Serial Input device Serial input device such as Car Speed sensor, BOG sensor, POS (Point of sales), ATM device which communicate with external device through RS-232 port can be integrated with the system.
Network Camera Server User’s Manual needs. User can upload serial input device protocol file which is provided by manufacturer only. This function is not for general use. Thus, if you need more close information about this, please contact your local distributor or manufacturer for further information, sales@flexwatch.com. 2.3 Serial output device The system supports to relay third party command to target device through Serial output device control mode.
Network Camera Server User’s Manual G. After setting up the parameters in the each filed, click ‘Apply’ button. Note that if you are sung X10 device protocol, you do not need to set up parameters, but simple select X10 “Enable” option. 2.3.2 X 10 device & Z256 X10 and Z256 is a protocol name of Device which is to control electronic devices over the Power line communications.
Network Camera Server User’s Manual A. By-pass command string from third party This is to send command string from third party application program to the target device connected to the server. More about this function can be supplied by HTTP CGI API guide. B. Control panel inside of the system You can create control panel of external device inside of the server and control target device through server web page. This function is not for general use.
Network Camera Server User’s Manual 4) System reboot will be recommended, then click ‘Reboot’ button. 5) After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports Configuration. 6) Click “PTZ Mode”, then following window will show up 7) Select the installed PTZ Model on the dropdown menu as above. 8) Select the Channel number installed with the PTZ, and click ‘Apply’ button 2.4.
Network Camera Server Seyeon User’s Manual SRX-500 485 O O O * VICON V-1311 485 O O O Samsung MRX-1000 485 O O O InterM VRX-2201 485 O O O ERNITEC BDR-510 485 O O FINE system CRR-1600I 232 O O O Samsung Techwin SRX-100B 485 O O O O NOTE : Symbol Reference * : Preset function was program only. ** : Preset function was Lap Tested only. *** : Preset function was field Tested 2.5 Voice Kit Connection and configuration G.723.
Network Camera Server User’s Manual 4) Select ‘Voice’ at AUX mode, and click ‘Apply’ button. Please note that Voice kit has to be connected to COM Port (through RS-232) only. 5) System reboot will be recommended, then click ‘Reboot’ button. 6) After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports Configuration 7) Click “Voice Mode”, then following window will show up UDP Port : Voice kit use UDP port to transmit Voice kit.
Network Camera Server User’s Manual 3 Alarm input device connection FlexWATCHTM server has Alarm Sensor interface so that it can send alarm notification by activating e-mail or FTP function or activate alarm output device such as Siren or light. FlexWATCHTM server supports opto-coupled input circuit and any dry contact type of Alarm sensor can easily be interfaced to the server. Following is circuit diagram for Alarm input part.
Network Camera Server User’s Manual Any Relay contact type of output device can be interfaced with FlexWATCHTM server. Simple connect the Alarm output device to Relay output(DO) port of FlexWATCHTM server. Following is a circuit diagram for alarm output terminal. Relay Output Circuit Diagram Pin-out Guide AUX port 87654321 DO-B DO- 4.2 Manual control of Alarm output device Alarm output device can manually be controlled through simple viewer page or admin page. 4.2.
Network Camera Server User’s Manual 4.2.2 Alarm output device through Admin Page Alarm output device can manually be controlled through Admin page of the system. This option is recommended when web browser based alarm output control panel is hided and administrator want to manually control Alarm output device. 1) Run Admin configuration panel 2) Click Alarm output control option in the Service configuration mode 3) Check the alarm output port and click “Apply” button 4.
Network Camera Server User’s Manual 2) Click None buffering service menu and select “Alarm output” menu. 3) Check the service “Enable” option and select output port 4) Select Alarm Duration time from the drop down menu. Note Alarm Duration time is to set up Alarm active time when alarm output device is activated by any condition. 5) Go to Condition mode and set up condition to activate Alarm output device. 80 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Advanced Service configuration Advanced service configuration is intended to provide more sophisticated functions which are required by sophisticated users. Thus, if you are not familiar with or not good at advanced features, we recommend you to read this guide carefully and consult with your local vendor to get more close information about these features.
Network Camera Server User’s Manual & ftp and Alarm buffering service B. Pre alarm buffer size : Once memory allocation is done, assign Pre alarm buffer size (Pre alarm image buffer pool) to be used for e-mail, FTP and Alarm buffering services. Any pre alarm buffer for respective e-mail, ftp and Alarm buffering services can be done within Pre alarm buffer size. C.
Network Camera Server User’s Manual pre alarm buffer size for respective camera can be done within this assigned memory. Note that Pre Alarm buffer for even Alarm buffering service can be done within this memory size. Thus, you need to be careful to assign memory for this service.
Network Camera Server User’s Manual This is to assign pre-alarm image buffer for each camera. Once this is configured, the maximum number of pre alarm for e-mail, ftp or Alarm buffering service (Pre alarm only) can be done with this buffer size, if there is enough memory space for respective services.
Network Camera Server • User’s Manual Total Pre-alarm buffer size (40%) Alarm buffering service size (60%) Total Buffer size is variable depending on the memory used by the system * Above is only for example - Total number of Pre Alarm+ Post Alarm for FTP per channel < 256 frame. - Total number of Pre + Post alarm for e-mail per channel <10 frames for channel.
Network Camera Server User’s Manual 1) Go to Advance service mode in the Service configuration section 2) Go to Buffering service mode 3) Click “Buffer Calculator” button to run the calculator 4) Pre configure pre/post alarm buffer for each service. This previous window can be open till you manually disclose the Window. Thus, you can refer to this table when you configure e-mail, ftp or Alarm buffering service configuration.
Network Camera Server User’s Manual Condition Setup Criteria Set up 2.1 Condition Setup This is to define basic condition to activate any option selected. Select right condition from the option provided. Always : To active any selected option regardless condition. If you select this condition Schedule and Event condition window become inactive. Schedule Only : To active any selected option by scheduling. If you select this criteria, Event condition 87 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual setup window become inactive Event Only : To activate any selected option by Event only. Sensor status change is recognized as Event. Schedule and Event : To active any selected action when Event is triggered for the specified time period only. If Event is incurred out of Scheduled period, no action will be done. 2.2 Criteria Setup Once condition is selected, you need to set up event criteria following which any selected service will be executed.
Network Camera Server User’s Manual Event number can be mapped as a Sensor port and camera number. DI Open State : This means that sensor is triggered and become open status from Normal close status. Select this when you use NC(Normal Close) type sensor. DI Close State : This means that sensor is triggered and become close status from Normal open. Select this when you use NO (Normal Open) type sensor. Motion Detection : By selecting this option, motion detection based event can be configured.
Network Camera Server User’s Manual 3 e-mail configuration Schedule, event or schedule and event driven e-mail sending is supported by the server so that when there is any pre-configured event is happened, e-mail notice will be sent to any e-mail account. 3.1 e-mail function configuration Up to 10 pre/post alarm image can be appended and sent through one e-mail when the event happens. By configuring pre/post alarm for e-mail, you can decide the number of image to be sent by an e-mail.
Network Camera Server User’s Manual Authentication Login: Now these days most of ISP is try to authenticate sender e-mail address due to security and spam mail issue. If sender authentication is enabled by your ISP, you need to get your login ID and Password from your e-mail service provider. Sender (E-MAIL): put the sender e-mail. If you use system default sender e-mail address, it will not work. E-mail address 1~ 3: put recipient e-mail address. Up to 3 different e-mail account can be supported.
Network Camera Server User’s Manual Note that the sum of pre and post alarm can not exceed 10 frames. Value Format : Value strings can be sent together with e-mails. Please click “ ” mark in the admin page to get more information. 3.2 e-Mail condition set up Up to 3 different e-mail conditions can be set up for each camera. Schedule, event or schedule & event driven e-mail condition can be set up to send e-mail.
Network Camera Server User’s Manual 4.1.1 Directory and File Name system Buffered FTP means that only pre/post alarm buffered image will be sent to FTP server when the ftp is triggered by the event. FTP function of FlexWATCHTM server has two different level of directory and file name option and following are details. Base Directory Name : ‘Base directory’ is a path where FTP image will be saved in the FTP server. ‘Base Directory’ can be made under "ROOT" or "Home" directory of FTP server.
Network Camera Server User’s Manual User defined prefix of file name of each image. File name of FTP images will be automatically concatenated after prefix (Base File name). Directory name : Multiple sub-directories can be created in the Base directory so that ftp image can be stored in a classified directory.
Network Camera Server User’s Manual 4.1.2 Sequence & Overwrite option for Periodic FTP (Duration Service) Configuration of Directory option for periodic is same as those of buffered service. The only difference is that there are Sequence Modulo and Overwrite option in the option filed. Sequence Modulo : This is used when some number of ftp images should be stored and refreshed as new ftp images are stored in the ftp server.
Network Camera Server User’s Manual 4.2 FTP service configuration Once you get a good understanding of “Pre/post alarm buffering”, “Condition”, “FTP directory & Name option” and “Sequence & Overwrite option” from above chapter, now you can easily configure FTP service function. ) To begin with, you must create ’Base directory’ in your FTP server. FTP images will be basically stored in it. WARNING!!! All the following steps must be configured in order.
Network Camera Server A. B. 9 User’s Manual Server Address: Input your ftp server address. Base Directory Name: Input the Base directory name that you already made under the root directory of your FTP server. If you create 'Base directory' as under 'home' directory of your FTP server, you can simply input the name of 'Base directory' only in the blank as below.
Network Camera Server User’s Manual ) After creating ‘Base directory’ in your FTP server, you should verify whether you get the right permission to read and write image files in the directory. To do this, simply try to upload and download any files onto 'Base directory'. C. Base File Name: Input ‘Base file name’ which will be given to the FTP images. D. User ID & Password: Input the user ID and PW of your FTP server. E. Connection Mode: Select ‘Active’ mode.
Network Camera Server User’s Manual 4.2.2 Periodic FTP service configuration Periodic FTP means that image will continuously be sent to FTP server when there is any event. No pre/post alarm image will be sent to FTP server. ) ’Periodice FTP configuration’ can be done by the same procedure of ’Buffered FTP configuration’ . Only the differencies are ’Sequence modulo’, ’Overwrite’ and ’Delay time’ configurations.
Network Camera Server 9 User’s Manual To enable ’Sequence Modulo’, input the required No. on it and select ’Sequence’ check-box on option menu. Or, 9 To enable ’Overwrite’, select ’overwrite’ check-box on option menu. 4) Go to ‘FTP (Periodic)’ menu again. After you select ‘Directory Name’ on option table, click ‘Save’ and ‘Make Directory’ button in order. 5) Go to ‘Advanced Services’ menu. And click ‘Apply’ button under the Status bar to apply the new service configuration.
Network Camera Server User’s Manual ) You need to select the file names, Month / Day / Hour / Minute, to assign the name of FTP images in order in the ’Base directory’. Otherwise, FTP images can not be stored promptly. 4) Only when you want to create classified directories under ‘Base directory’ (flexwatch) and make ftp images to be stored in it, you need to go to ‘FTP (Periodic)’ menu again and select ‘Directory Name’. Then click ‘Make Directory’ button. 5) Go to ‘Advanced Services’ menu.
Network Camera Server User’s Manual ‘Save Configuration’. 5 Alarm Buffering Service Pre/Post alarm image can be stored in the system memory so that user can remotely connect the server and playback stored image at any time. 5.1 Alarm Buffering Service Configuration 1) Go to Advance Service menu in the service configuration mode and set up system memory assignment for Alarm Buffer service. 2) Select “Buffering Service” option and check whether Pre Alarm buffer size is already assigned.
Network Camera Server User’s Manual 5.2 Playback of Pre/post alarm Image Once Alarm buffering service configuration is correctly done and pre/post alarm image is stored, any stored Pre/post alarm image can remotely playback through admin window. 1) Click Alarm Buffering Service menu from the Advance Service configuration menu Preview Single Images: This is to view image one by one. Preview Multi images: You can view panoramic images of all the saved images at a glance.
Network Camera Server User’s Manual your vendor or manufacturer to get in-depth technical documentation. 6 Sensor Notification service Sensor Notification service is to send alarm trigger information to third party application program through CGI Patch. This option is to invoke third party application program upon receipt of sensor information from FlexWATCHTM server.
Network Camera Server User’s Manual Utilities Utilities is to manage and control system properly. Save Configuration, Flash Update, System Reboot and system upgrade options are provided. 1 Save Configuration This is to save all new configuration and settings in the system memory. Once new configuration is saved by “Save Configuration” menu, new configuration will permanently saved in the system memory only after system Reboot or system power off 2 Reboot Reboot means restart system.
Network Camera Server User’s Manual logics for system configuration, since executing this option Except Network configuration will lose all of your setting. 4 System Update System update can remotely be done through web page of the system or ftp option with telnet and Hyper Terminal mode. In this user manual only web based system update method is described and ftp based system update method can separately provided. 4.
Network Camera Server User’s Manual All (kernel, RAM disk, System, Web) Update: To completely update all the system for Kernel, RAM Disk, System and Web all together except PTZ Device Driver or Sensor Device Driver. This option is recommended if there is special notice by manufacturer. Generally complete system update comes only when there is big change for all of the system software. System and Web Update: To update system and web related software together. This update can be common to update the system.
Network Camera Server User’s Manual PTZ Device Driver is already built-in the system. But if there is a new PTZ Device driver supported by the system, it can separately uploaded into the system without other software change. Sensor Device Driver : Serial input device driver can separately be uploaded into the system so that independent Serial input device can work with FlexWATCHTM Server. 4.
Network Camera Server User’s Manual If you want to skip specific update, click “Skip” button. 11) Once update is successfully done following result will come up. 12) If you want to update RAM Disk, System and web page, please click “Next” button follow the web guide to update more files. 13) If all of file update is finished “System Reboot” window will come and do system reboot to apply new update. 109 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual 110 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Warranty Product Network Video Server Model FlexWATCHTM 1110 / 1110W S/N A/S Seyeon Tech Ltd. +82-2-3017-0866 2 year Limited www.flexwatch.com Warranty Seyeon Tech Co., Ltd. TEL : +82-2-3017-0855 FAX : +82-2-3017-0843 http://www.seyeon.co.kr http://www.flexwatch.com A/S Center: Tel : +82-2-3017-0855 Fax: +82-2-3017-0843 111 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual User’s Guide FlexWATCHTM 1110L / 1110LW (Version. 3.0_Rev1) Seyeon Technology Co., Ltd www.flexwatch.com www.intplus.
Network Camera Server User’s Manual Table of Contents Overview of FlexWATCHTM Server ............................................................ 9 1 Packing List................................................................................................ 9 2 What is FlexWATCHTM? ............................................................................... 10 2.1 Key Function of FlexWATCHTM .............................................................. 10 2.2 Product Specification ..................
Network Camera Server User’s Manual 1.2 Java Applet based live view ................................................................ 36 1.3 Simple viewer page guide................................................................... 36 2 FW-Voyager based view and recording ......................................................... 38 3 Camera configuration ................................................................................ 38 3.1 Camera value string configuration...............................
Network Camera Server User’s Manual 3 Network port configuration ......................................................................... 56 3.1 HTTP port configuration...................................................................... 56 3.2 NVCP –Tx Port .................................................................................. 56 3.3 VDCP Port configuration ..................................................................... 57 4 WAN Configuration and Application .........................
Network Camera Server User’s Manual 4.1 Alarm output device connection........................................................... 73 4.2 Manual control of Alarm output device.................................................. 73 4.3 Automatic Control of Alarm Output device............................................. 74 Advanced Service configuration ............................................................ 76 1 Buffering Service .........................................................................
Network Camera Server User’s Manual 4 System Update ....................................................................................... 102 4.1 Description of files system ................................................................ 102 4.2 Update Procedure............................................................................ 104 6 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Notice • The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Seyeon Tech assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. • Seyeon Tech reserves the right to make changes in the product design without reservation and without notification to its users.
Network Camera Server User’s Manual Warning To prevent risk of electric shock, Do not remove system-case. No user serviceable parts inside. Any repair or modification for the product will be allowed to qualified service personal only. Do not expose this appliance to water or moisture. Do not install this product in Hazardous areas where highly combustible or explosive products are stored or used.
Network Camera Server User’s Manual Overview of FlexWATCHTM Server 1 Packing List Please check and make sure following items are included in your package without any missing items. If there are any missing items, please refer to your local distributor. A. FlexWATCHTM 1110L or 1110LW…………………………………………………………………….1unit B. RS-232 Serial cable…………………………………………………………………..…1unit (Cross cable DB9 Female) C. Power Adapter…………………………………………………………………………..….1unit (Power Cable, SMPS DC 12V Adapter) D.
Network Camera Server User’s Manual 2 What is FlexWATCHTM? The FlexWATCHTM server is the Network camera Server, which transmits digital images captured by Analog CCD camera over the Internet. So users can view real-time live images over the Internet at anytime and anywhere using the standard web browser such as MS Internet Explorer or Netscape Communicator. There is no need other specific software to view real-time live images over the Internet.
Network Camera Server User’s Manual 2.2 Product Specification Hardware · Built-in Motion detections (Up to 144 blocks) · 32bit Embedded CPU · e-mail, FTP, alarm Buffer by event or schedule · Flash 4Mbytes /SDRAM: 32Mbytes · IP notification, Alarm Notification to e-mail, CGI path by event or schedule · Hardware Motion JPEG engine · Linux version 2.4.xx operating system UART Control System Requirements · OS : Win 95/98/2000/XP/NT/ ME, Linux, Mac, Unix, Linux · Browser : MS IE( 5.
Network Camera Server User’s Manual 2.3 Basic Network Connection Diagram FlexWATCHTM server provides flexible connectivity with any type of networks available around you such as Leased line, Cable modem, xDSL line and PSTN (POT) line. Thus, it can be installed either in LAN or WAN environment as long as there is network available. But its configuration is subject to change depending on its environment. Following is basic network diagram for using FlexWATCHTM server.
Network Camera Server User’s Manual 2.3.3 Dynamic IP address from Cable or xDSL line FlexWATCHTM server can be installed on even Dynamic IP network. But it needs to be registered in AOIP server which is an IP gateway running by Flexwatch.com or your local Distributor. For more details, please refer to Technical guidebook in the CD manual. 2.3.
Network Camera Server User’s Manual your local Phone line based Internet connection. 2.3.5 Dial-in to FlexWATCHTM server through PSTN line You can make a call to FlexWATCHTM server from anywhere and at anytime. But if you are concerned about call charge, we are recommending using above connection. 2.
Network Camera Server User’s Manual 3 Hardware Description • This chapter contains list of items to be prepared for the installation of FlexWATCHTM server. • Please carefully read this chapter before the installation. • Please prepare all the necessary items before start installation to prevent any possible malfunction or any other hazard can be happened during the installation. 3.1 Caution and observance • Keep the device in the clean and dried area where air ventilation is guaranteed.
Network Camera Server User’s Manual 3.2 Hardware Description 3.2.1 FW-1110L & 1110LW Hardware Description Front Panel View AB A PWR LED B LAN LED C Camera Control Switch Level Control D C D Indicate power on/off Always red-light on when turned on Blinking only when LAN is connected to the network Green-light on when LAN connection is OK To adjust camera quality. Please refer to below description for more details. To adjust voltage level of DC iris lens.
Network Camera Server User’s Manual Under bright background lighting condition, the object appears dark. But in the BLC 'ON' mode, you can obtain a clean picture. ELC(ON/OFF) When set to ‘ON’ mode, the electronic iris switch automatically varies the camera's shutter to mimic auto-iris control, allowing fixed or manual iris lens to be used in a wider range. When this switch is set to ‘ON’ mode, set the FLK switch to ‘OFF’ mode. When a manual iris lens is mounted on camera, set ELC switch to ‘ON’ mode.
Network Camera Server User’s Manual Auto Iris Lens interface Only DC Iris lens can work with FlexWATCHTM server. If you are going to use DC auto iris lens acquired in the market place, please following the connector assembly guide below. ) Notice a. set the ELC switch in the front panel to 'OFF' b Please check the pin number on the surface of auto iris lens connector Pin Number DC Iris Lens 1 2 3 4 CONTROL( - ) CONTROL( + ) DRIVE( + ) DRIVE( - ) 18 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual IP assignment 1 Key Words for Network LAN (Local Area Network) : Under the LAN network, any network device in the same LAN network can be accessed by any other network device. But LAN network can not be accessed from the Internet (WAN). Most of case, LAN is built after Router which is connected to WAN network so that Network device in the local area network can access to the Internet through Router.
Network Camera Server User’s Manual Dynamic IP address : A dynamic IP address is an IP address that is automatically assigned to a client station (computer, network equipment, etc.) in a TCP/IP network. Dynamic IP address is typically assigned by a DHCP server, which can be a computer on the network or another piece of hardware, such as router.
Network Camera Server User’s Manual LAN is never transmitted on the Internet. AOIP (Always On Internet Protocol) Server: AOIP™ server (Always On IP) is run by Seyeon Technology or its business partner and is a gateway for remote users to access FlexWATCH™ servers which is connected dynamic IP address over DSL,Cable modem and PSTN network over the Internet.
Network Camera Server User’s Manual network. \ C:\> ipconfig Windows 2000/XP IP Configuration Ethernet adapter Local area connection : Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.0.158 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 C:\> With above info, you can get information about your network from your PC and see which IP class of IP address should be assigned to FlexWATCHTM server.
Network Camera Server User’s Manual Reply from 192.168.0.155: bytes=32 time=10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 2.1.2 DHCP Enabled PC If your PC is set to use DHCP, you need to check out IP address of your PC using ‘ ipconfig’ command at DOS Prompt window. You need to get IP address from your network administrator to assign it to FlexWATCHTM server.
Network Camera Server User’s Manual over cable. 2.2.1 LAN Cable Environment If your PC is connected to network through LAN cable, you need to connect FlexWATCHTM server to LAN port of Hub or Router. 2.2.2 Cross-over cable If LAN network is not available, you can directly connect FlexWATCHTM server to your PC through Cross-over cable.
Network Camera Server User’s Manual 2.3 PC Environment Check out whether your PC is connected to LAN or WAN network or stand-alone. If stand alone, you need to use Cross-over cable or build up LAN environment to use LAN cable. 3 Factory Default Please refer to the following factory defaults to change setting up. Factory Default Admin ID Admin password IP address Network mask root root 10.20.30.40 255.255.255.
Network Camera Server User’s Manual A. Firstly it is required to assign an IP address for the LAN port connection. (It’s the same procedure of IP assignment for FW-1110L’s LAN port connection.) B. After that, through the LAN port connection, you can access to ‘Admin menu’ of FW-1110LW on your web browser and assign another IP address for its Wireless LAN connection. (Refer to the end of this chapter, page 32.) 4.
Network Camera Server User’s Manual Description of Window Menu Description A Serial No. (MAC Address) of System B IP Address on PC Enter FlexWATCHTM server Serial No. (Mac address) attached at the bottom of the unit and select the LAN port. WAN PORT is only for setting up FW-5000 and FW-5440 model which has two LAN Card inside of the box. Auto scanned IP address of user’s computer with IPInstallationWizard.exe running on.
Network Camera Server User’s Manual ------------ Set Server IP Address -----------ARP: Adding static entry to ARP table [ OK ] Ping: Trying ping 10.10.225.100 [FAILED] Please check whether IP address and MAC address is valid. Then, please retry again. ARP: Deleting static entry from ARP table [ OK ] If IP address setting is failed, please check whether correct IP/MAC address is entered. - And try again with correct IP/MAC address, or please use HyperTerminal method. If the above result is O.K.
Network Camera Server User’s Manual 2) Run Hyper Terminal Program on user’s PC. Window start> Program> Accessories> Communication> Hyper Terminal 3) If Hyper Terminal window come up as below, input HyperTerminal name (ex. Flexwatch) and press ‘OK’ button. 4) Select the connected COM port with serial cable and press OK button. 5) When ‘Port Settings’ window show up, input each values from the table below. 29 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Serial Port Settings Bits per Second Data bits Parity Stop bits Flow control Value 115200 8 None 1 None 6) After setting Hyper Terminal, press Enter key several times and then you can see messages as below. Input Login ID and Password. (Factory defaults for Admin ID and Password are root/root.) Seyeon Tech Co., Ltd. 2001-2003 Linux Kernel 2.4.20-syl1 FlexWATCH login: 7) If you correctly input Login ID and Password, ‘bash#’ prompt will show up as below.
Network Camera Server User’s Manual bash# netconfig --------------------- Network(LAN) Setup --------------------Current configuation IP Address : 10.20.30.40 Network Mask : 255.255.255.0 Gateway : 10.10.1.1 Enter IP Address : 9) Input new IP address, Network Mask and Gateway values to be assigned to FlexWATCHTM server. After this, press “y” to apply the new network configuration. Enter IP Address : 10.10.213.22 Enter Network Mask : 255.255.0.0 Enter Gateway : 10.10.1.
Network Camera Server User’s Manual Bash# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:6F:81:00:AE inet addr:10.10.213.22 Bcast:10.10.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6382 errors:0 dropped:0 overruns:0 frame:0 TX packets:294 errors:0 dropped:0 overruns:0 carrier:0 collisions:2 txqueuelen:100 Interrupt:9 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.
Network Camera Server User’s Manual 2) Go to ‘Admin Menu’ => ‘Network Configuration’ => ‘Wireless LAN’. ) Note: SSID may also be referred to as "ESSID", and is case sensitive. 3) Select ‘Enable’, then input ‘SSID’, ‘IP address’ and ‘NetMask’. You need to input the same values registered on your Wireless Router (Access Point). And click ‘Apply’ button. Example) 4) Go to ‘Admin Menu’ => ‘Network Configuration’ => ‘Gateway Configuration’. 33 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual 5) Select ‘Wireless LAN’ and input ‘Gateway address’. It must be same as the ones registered at the Wireless Router (Access Point). And click ‘Apply’ button. 34 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Live view & Camera Configuration Once IP assignment is finished, you can view live view through standard web browser such as MS Internet Explorer or Netscape Navigator. There are two different type of viewing option provided by FlexWATCHTM server. One is simple live view and the other is “FW-Voyager” which provides personal Network DVR(Digital Video Recording) and viewing solution. Depending on the OS and web browser, you can get different viewing option as well.
Network Camera Server User’s Manual When the Client pc is not connected to Internet, you need to manually install ActiveX components in your viewing PC. - Insert the product CD in your PC - Select “FlexWATCHTM Simple Viewer control” program - Application idea ActiveX based SDK is provided for software developers so that application program developers can easily utilize digital video from FlexWATCHTM server for his own video application. 1.
Network Camera Server User’s Manual screen, snapshot, PTZ control, Relay output control, Voice kit connection as well. Module Selection : Not user selectable option field. Frame rate : You can adjust display frame rate by control Frame rate option Display size : X1 for Real size, x2 for double size and Full screen mode is supported. Snap shot : You can make a snapshot of video while viewing the live video.
Network Camera Server User’s Manual Relay output device can be controlled through simple view page. But note that you need to get permission to control it. 2 FW-Voyager based view and recording FW-Voyager is web based DVR software for personal video recording. Using this free software, user can easily install the software and do video recording at any time. Note that FW-Voyager is works on MS Internet explorer of Window OS.
Network Camera Server User’s Manual Default Video Format : To manually change video format. Note that server auto sense the video format Video with UART sensor data: Serial input data can be sent along with video so that application program can read serial input data Video with channel name: To send video along with channel name Video with server name: To send video along with server name Video with IP address: To send video along with IP Address Image encryption: Image encryption is security feature.
Network Camera Server User’s Manual value string. 3.1.1 Image encryption Image encryption is security feature to prevent unwanted image hacking when anonymous user accesses the system. Once it is enabled, user must enter encryption code to view live video. 1) Simple set up encryption code 2) Enter encryption key code to view live. Up to 8 alpha-numeric characters can be used. ) Note Once you lost your encryption code, you can reconfigure encryption code through Admin Mode.
Network Camera Server User’s Manual User defined camera name will be appeared on the camera name column of video. Up to 20 different English characters can be used. ( Notice : If you are using 2-Byte Unicode Character, number of character is limited to 10 ) Image Size : 4 different size of video can be set up.
Network Camera Server User’s Manual displayed. Video Source: color and Gray mode option Image Quality: 5 quality levels - highest, high, normal, low, lowest ) Note Please note that if you increase image size and quality, actual JPEG file size will be increased and this may affect actual transmission frame rate. Thus, you are required to check out your network bandwidth available for FlexWATCHTM server and select the right size and quality of video.
Network Camera Server User’s Manual 3.3.2 How to save Motion triggered image in the NVR solution Recording in the FW-5440/5000 Simply check “Motion Detection” option in the recording condition menu in the FW5440 or FW-5000 when motion detection option is enabled in the FlexWATCHTM server. 43 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Recording in the FW-Manager To record motion triggered image in the FW-Manager (NDVR Software) client program, you should not use Software motion detection function in the FW-Manager. - Simply configure motion detection for the selected camera in the FlexWATCHTM server - Set up Motion based recording condition in the FW-Manager (Do not set up motion detection area in the FW-Manager software). 44 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual System Configuration System configuration is to set up basic functions which help you properly run and manage the system. It is highly recommended to set up the configuration before any other configurations. Following functions are provided in the System configuration mode.
Network Camera Server User’s Manual 1) Go to Date & Time setup menu in the System configuration section of Admin mode 2) Set the correct time and click “Apply” button 2.2 Date & Time using NTP server If multiple servers are installed over the network and controlled by client program and synchronized time info is required, use NTP(Network Time Protocol) option. 1) Go to [NTP setup] menu in the Network configuration section of Admin Mode 2) Type in NTP server name or use default NTP timeserver, ntp.ewha.
Network Camera Server User’s Manual A. Option to allow system access without system Login ID & PW B. Channel based different user account creation C. Different control authority for Video, Audio, and relay output device control 4.1 Full Access To allow system access by anyone who know the IP address. PTZ, Audio and Relay output device can be controlled by anyone. Thus, if security for video is important, it is highly recommended to user limited access mode below 4.
Network Camera Server User’s Manual Full Access : If full access is selected, any body can access the server and control the video. No Access : This is to temporally restrict camera access by specific user without delete user account to temporally block access to the camera. Selective Access: This is to set up control authority for the respective or all cameras. VS Module ID is FlexWATCHTM server ID which is recognized by the server. Default # is 0.
Network Camera Server User’s Manual 1) Go to [Access Control] option in the system configuration menu in the Admin page. 2) Set up Maximum frame rate. Following table could be an example. File size is variable depending on the complexity of the scene. Thus, it hard to get exact and fixed number of file size. Frame rate requirement Average File Required Bandwidth size 10FPS 25FPS 176X112 3KBps 240K bps 600K bps NTSC 352X240 8KBps 640K bps 1.6M bps 704X480 20KBps 1.
Network Camera Server - User’s Manual If you do not connect FlexWATCHTM server to NDVR server, do not set TX module configuration - Once Tx Module configuration is done, set up RX module configuration in the NDVR server as well Video proxy function is supported by NDVR server such as FW-5440 and FW-5000 server.
Network Camera Server User’s Manual NVCP Password is security feature which authenticate server access by RX module (FW-5440 or 5000 NDVR server) to FlexWATCHTM server. Once NVCP Password is configured, that password must be set up in the NDVR server to get video from FlexWATCHTM server. Thus, you must make a note of NVCP password. 3) Select TX Module. By configuring TX module, you can program the server to communicate with different NVR servers.
Network Camera Server User’s Manual Following is recommended setting guide for TX and RX module for FlexWATCHTM server and NDVR depending on the network environment.
Network Camera Server User’s Manual Network Configuration Network configuration mode provides interface for the server to be connected to broadband network or PSTN line. In addition to basic network, application port such as HTTP, NVCP, Voice port configuration and IP filtering options are provided. 1 Network configuration You can change IP address of server through LAN configuration mode. 1.1 Static IP Select this to assign static IP in the server.
Network Camera Server User’s Manual Once DHCP is enabled, there is not other setting to be changed in the network works configuration except DNS info, if required. 2.1.1.1 IP notification by E-mail service You can receive IP address of the server through e-mail from the server, when the server is connected to DHCP server. Please do not enable DHCP client feature till you open a way to receive or get IP address of server. 1) Check whether you are in the DHCP environment before starting set-up.
Network Camera Server User’s Manual configuration in Advanced Service 2.1.1.1 Server access through AOIP server Once Server is registered in the AOIP server and DHCP is enabled, you can access the server through AOIP server. IP address of server can be found from AOIP server as well. In this case you do not need to configure e-mail address setting to get IP address from the server.
Network Camera Server User’s Manual connection. ) Note Once PPPoE is enabled, LAN network setting will be disabled. 3 Network port configuration HTTP port, NVCP and VDCP ports are application port through which video and audio data can be transmitted over the TCP/IP network. 3.1 HTTP port configuration When you need to change Default HTTP Port (#80) to other port, you can change HTTP port. This is very useful when more than one server should be installed behind a router.
Network Camera Server User’s Manual 3.3 VDCP Port configuration VDCP port is UDP port for Voice Communication. By changing VDCP port (Default number is 32001), you can install more than one Voice kit and Video server under the router. Note that when Voice Kit is connected to Internet, respective UDP port of the router must be opened.
Network Camera Server User’s Manual Dial-in is to allow server connection from remote client. This option is useful for the user to connect the server at any time. Especially when the server sends e-mail notification for the alarm and user want to check the situation. 4.2.2 Application with Dial-out Server can establish the Internet connection through PSTN line and send FTP or e-mail when the alarm condition is triggered by any event.
Network Camera Server User’s Manual PPP Client : This means that FlexWATCHTM server act as client and call out to ISP.\ PPP Server : This means that FlexWATCHTM server acts as a Server and receives a call from remote user. Tel#, User ID and User password : ISP phone number and user account for Internet connection to ISP. Default Route : Enable this option. When Dial-out option is selected. ) Note If you use external modem, we recommend ‘3COM U.S.
Network Camera Server User’s Manual This mode is not for general users. Thus, if you need to connect special modem device, please contact your vendor or manufacturer for more information, sales@flexwatch.com 4.4 Dial-in Configuration Dial-in is to allow client PC to call into the server and get live video through PSTN line. Overall configuration is very similar to that of Dial-out configuration. But much more simple than Dial-out. 1) Go to [WAN (PPP, Modem, etc)] menu in the Network configuration mode.
Network Camera Server User’s Manual Local IP address and Remote IP address is virtual IP address which is used at the time of Modem connection only Local IP address : System default IP address (192.168.2.1) resides in the FlexWATCHTM server for modem connection only. So when you connect the FlexWATCHTM server from remote PC using dial-up networking and physical connection is made, you need to run your web browser and enter this system default IP address(192.168.2.1) to view live video.
Network Camera Server User’s Manual LAN : This is default path the send any data to outside. Modem : when PSTN or other medium than LAN is used to send data to outside. This service port must be checked when any data is to be sent through PSTN or other medium than LAN which is connected to COM port. ) Note Service path must be set up and checked before starting WAN configuration to send any data through external PSTN modem connection or equivalent If LAN is to be used, select “None(LAN)” option.
Network Camera Server - User’s Manual Once things are set up, you can login to AOIP server and connect your FlexWATCH™ server. ) Note AOIP is proprietary data service run by FlexWATCH™ or its business partners around the world. Thus, depending on the country AOIP service can run by your local vendor or master distributor or in some case, you need to user AOIP server run by manufacturer. More detailed information about how to use can be acquired by contact your local distributor or sales@flexwatch.com .
Network Camera Server User’s Manual NVCP-Tx Port should be enabled only when video is transmitter to NDVR server such as FW-5440 and FW-5000, or Video proxy server supplied by FlexWATCHTM server. If not, do not enable this option. 7 Network Status You can see all the network status configured in the system through “Network status” option. Please Select “Network Status” menu in the Network configuration mode of Admin Window. 64 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual External Device connection & configuration External device such as Serial input device, Serial output (UART) device, PTZ (pan/Tilt/Zoom) device, Audio kit and Alarm input and output device can be connected to the system and controlled over the TCP/IP network. 1 Serial Ports Configuration Guide This chapter will guide you how to install and configure Serial-interface devices.
Network Camera Server User’s Manual 1.1.2 Ports Connection for using two different devices. Two different devices can simultaneously connected to the server and work together. Please refer to following port connection guide and use the right port to get the external devices worked with FlexWATCHTM server.
Network Camera Server User’s Manual RS-232 Serial cable. 2) Go to Admin Menu >> System Configuration >> Serial Ports Configuration 3) Select ‘Console’ at COM mode, and Click ‘Apply’ button 4) System reboot will be recommended, then click ‘Reboot’ button. 2.2 Serial Input device Serial input device such as Car Speed sensor, BOG sensor, POS (Point of sales), ATM device which communicate with external device through RS-232 port can be integrated with the system.
Network Camera Server User’s Manual needs. User can upload serial input device protocol file which is provided by manufacturer only. This function is not for general use. Thus, if you need more close information about this, please contact your local distributor or manufacturer for further information, sales@flexwatch.com. 2.3 Serial output device The system supports to relay third party command to target device through Serial output device control mode.
Network Camera Server User’s Manual G. After setting up the parameters in the each filed, click ‘Apply’ button. Note that if you are using X10 or Z256 device protocol, you do not need to set up parameters, but simple select X10 “Enable” option. 2.3.2 X 10 device & Z256 X10 and Z256 is a protocol name of Device which is to control electronic devices over the Power line communications.
Network Camera Server User’s Manual A. By-pass command string from third party This is to send command string from third party application program to the target device connected to the server. More about this function can be supplied by HTTP CGI API guide. B. Control panel inside of the system You can create control panel of external device inside of the server and control target device through server web page. This function is not for general use.
Network Camera Server User’s Manual Configuration 7) Click “Voice Mode”, then following window will show up UDP Port : Voice kit use UDP port to transmit Voice kit. If voice communication should be done through WAN network, please make sure UDP port is not blocked to Internet connection in router or firewall etc. The default VDCP (Voice Device Control Protocol) port is 32001, please go to Network port configuration mode to change VDCP port if required.
Network Camera Server User’s Manual activating e-mail or FTP function or activate alarm output device such as Siren or light. FlexWATCHTM server supports opto-coupled input circuit and any dry contact type of Alarm sensor can easily be interfaced to the server. Following is circuit diagram for Alarm input part. Opto-coupled Sensor input Diagram Pin-out Guide AUX port 87654321 DI 1) Simply connect the alarm sensor to the server. 2) Go to “Alarm input/out” menu to name the alarm input name.
Network Camera Server User’s Manual 4.1 Alarm output device connection Any Relay contact type of output device can be interfaced with FlexWATCHTM server. Simple connect the Alarm output device to Relay output(DO) port of FlexWATCHTM server. Following is a circuit diagram for alarm output terminal. Relay Output Circuit Diagram Pin-out Guide AUX port 87654321 DO-B DO- 4.2 Manual control of Alarm output device Alarm output device can manually be controlled through simple viewer page or admin page. 4.2.
Network Camera Server User’s Manual 4.2.2 Alarm output device through Admin Page Alarm output device can manually be controlled through Admin page of the system. This option is recommended when web browser based alarm output control panel is hided and administrator want to manually control Alarm output device. 1) Run Admin configuration panel 2) Click Alarm output control option in the Service configuration mode 3) Check the alarm output port and click “Apply” button 4.
Network Camera Server User’s Manual 2) Click None buffering service menu and select “Alarm output” menu. 3) Check the service “Enable” option and select output port 4) Select Alarm Duration time from the drop down menu. Note Alarm Duration time is to set up Alarm active time when alarm output device is activated by any condition. 5) Go to Condition mode and set up condition to activate Alarm output device. 75 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Advanced Service configuration Advanced service configuration is intended to provide more sophisticated functions which are required by sophisticated users. Thus, if you are not familiar with or not good at advanced features, we recommend you to read this guide carefully and consult with your local vendor to get more close information about these features.
Network Camera Server User’s Manual please select other product such as FW-1110 or FW-1110W series. Steps to use Buffering service Following is a step to configure and use Buffering services A. System memory allocation : This is to allocated limited system memory for e-mail & ftp and Alarm buffering service B. Pre alarm buffer size : Once memory allocation is done, assign Pre alarm buffer size (Pre alarm image buffer pool) to be used for e-mail, FTP and Alarm buffering services.
Network Camera Server User’s Manual e.g) 500 KB / 10KB = 500 frames which is possible total buffer size. Total Pre-alarm Buffer size : This is to assign memory space for the services that Pre Alarm video buffer is required such as e-mail and FTP (Edge service) and Alarm buffering service. Once it is configured, pre alarm buffer size for respective camera can be done within this assigned memory. Note that Pre Alarm buffer for even Alarm buffering service can be done within this memory size.
Network Camera Server User’s Manual Pre-alarm Buffer size : This is to assign pre-alarm image buffer for each camera. Once this is configured, the maximum number of pre alarm for e-mail, ftp or Alarm buffering service (Pre alarm only) can be done with this buffer size, if there is enough memory space for respective services.
Network Camera Server User’s Manual 4) Click “Buffer Calculator” button to run the calculator. 1.2 Buffer calculator Through “Buffer Calculator” option, you can easily calculate assignable pre/post alarm buffer size for each channel before setting up Pre/Post alarm buffer frame in the system memory. Following is logic for Pre/Post alarm assignment. By running buffer calculator you can try pre/post alarm size.
Network Camera Server - User’s Manual Total number of Pre + Post alarm for e-mail per channel <10 frames for channel. - Pre alarm frame for FTP & e-Mail and Alarm buffer service shall be done within Total pre-alarm buffer size - Post alarm for FTP & e-mail has nothing to do with Total buffer size. - Post alarm for Alarm buffering service can be done within the Memory allowed by Alarm buffering service size. - The ratio of sum in the Buffer Calculator should be less than 100%.
Network Camera Server User’s Manual Condition Setup Criteria Set up 2.1 Condition Setup This is to define basic condition to activate any option selected. Select right condition from the option provided. Always : To active any selected option regardless condition. If you select this condition Schedule and Event condition window become inactive. Schedule Only : To active any selected option by scheduling.
Network Camera Server User’s Manual To activate any selected option by Event only. Sensor status change is recognized as Event. Schedule and Event : To active any selected action when Event is triggered for the specified time period only. If Event is incurred out of Scheduled period, no action will be done. 2.2 Criteria Setup Once condition is selected, you need to set up event criteria following which any selected service will be executed.
Network Camera Server User’s Manual Event number can be mapped as a Sensor port and camera number. DI Open State : This means that sensor is triggered and become open status from Normal close status. Select this when you use NC(Normal Close) type sensor. DI Close State : This means that sensor is triggered and become close status from Normal open. Select this when you use NO (Normal Open) type sensor. Motion Detection : By selecting this option, motion detection based event can be configured.
Network Camera Server User’s Manual 3 e-mail configuration Schedule, event or schedule and event driven e-mail sending is supported by the server so that when there is any pre-configured event is happened, e-mail notice will be sent to any e-mail account. 3.1 e-mail function configuration Up to 10 pre/post alarm image can be appended and sent through one e-mail when the event happens. By configuring pre/post alarm for e-mail, you can decide the number of image to be sent by an e-mail.
Network Camera Server User’s Manual Authentication Login: Now these days most of ISP is try to authenticate sender e-mail address due to security and spam mail issue. If sender authentication is enabled by your ISP, you need to get your login ID and Password from your e-mail service provider. Sender (E-MAIL): put the sender e-mail. If you use system default sender e-mail address, it will not work. E-mail address 1~ 3: put recipient e-mail address. Up to 3 different e-mail account can be supported.
Network Camera Server User’s Manual Note that the sum of pre and post alarm can not exceed 10 frames. Value Format : Value strings can be sent together with e-mails. Please click “ ” mark in the admin page to get more information. 3.2 e-Mail condition set up Up to 3 different e-mail conditions can be set up for each camera. Schedule, event or schedule & event driven e-mail condition can be set up to send e-mail.
Network Camera Server User’s Manual Depends on the service type, Buffering and None buffering Service, its directory option is slightly different. 4.1.1 Directory and File Name system Buffered FTP means that only pre/post alarm buffered image will be sent to FTP server when the ftp is triggered by the event. FTP function of FlexWATCHTM server has two different level of directory and file name option and following are details.
Network Camera Server User’s Manual Base File name : User defined prefix of file name of each image. File name of FTP images will automatically be concatenated after prefix( Base File name ). Directory name : Multiple sub-directories can be created in the Base directory so that ftp image can be stored in a classified directory.
Network Camera Server User’s Manual 4.1.2 Sequence & Overwrite option for Periodic FTP (Duration Service) Configuration of Directory option for periodic is same as those of buffered service. The only difference is that there are Sequence Modulo and Overwrite option in the option filed. Sequence Modulo : This is used when some number of ftp images should be stored and refreshed as new ftp images are stored in the ftp server.
Network Camera Server User’s Manual 4.2 FTP service configuration Once you get a good understanding of “Pre/post alarm buffering”, “Condition”, “FTP directory & Name option” and “Sequence & Overwrite option” from above chapter, now you can easily configure FTP service function. ) To begin with, you must create ’Base directory’ in your FTP server. FTP images will be basically stored in it. WARNING!!! All the following steps must be configured in order.
Network Camera Server A. B. 9 User’s Manual Server Address: Input your ftp server address. Base Directory Name: Input the Base directory name that you already made under the root directory of your FTP server. If you create 'Base directory' as under 'home' directory of your FTP server, you can simply input the name of 'Base directory' only in the blank as below.
Network Camera Server User’s Manual ) After creating ‘Base directory’ in your FTP server, you should verify whether you get the right permission to read and write image files in the directory. To do this, simply try to upload and download any files onto 'Base directory'. C. Base File Name: Input ‘Base file name’ which will be given to the FTP images. D. User ID & Password: Input the user ID and PW of your FTP server. E. Connection Mode: Select ‘Active’ mode.
Network Camera Server User’s Manual 4.2.2 Periodic FTP service configuration Periodic FTP means that image will continuously be sent to FTP server when there is any event. No pre/post alarm image will be sent to FTP server. ) ’Periodice FTP configuration’ can be done by the same procedure of ’Buffered FTP configuration’ . Only the differencies are ’Sequence modulo’, ’Overwrite’ and ’Delay time’ configurations.
Network Camera Server 9 User’s Manual To enable ’Sequence Modulo’, input the required No. on it and select ’Sequence’ check-box on option menu. Or, 9 To enable ’Overwrite’, select ’overwrite’ check-box on option menu. 4) Go to ‘FTP (Periodic)’ menu again. After you select ‘Directory Name’ on option table, click ‘Save’ and ‘Make Directory’ button in order. 5) Go to ‘Advanced Services’ menu. And click ‘Apply’ button under the Status bar to apply the new service configuration.
Network Camera Server User’s Manual send image to FTP server, please use Overwrite function in the Periodic FTP service. EXAMPLE of Periodic FTP service) Let’s suppose that FlexWATCH server takes one frame of the image every 15min and sends it to FTP server continuously. And all the images are being stored under the directory name 'flexwatch'(Base directory) in the FTP server for one year. 1) Go to ‘Advanced Services – Non-buffering Service - FTP(Periodic) - Camera1 Condition1’ on the Admin menu.
Network Camera Server User’s Manual ) You need to select the file names, Month / Day / Hour / Minute, to assign the name of FTP images in order in the ’Base directory’. Otherwise, FTP images can not be stored promptly. 4) Only when you want to create classified directories under ‘Base directory’ (flexwatch) and make ftp images to be stored in it, you need to go to ‘FTP (Periodic)’ menu again and select ‘Directory Name’. Then click ‘Make Directory’ button. 5) Go to ‘Advanced Services’ menu.
Network Camera Server User’s Manual ‘Save Configuration’. 5 Alarm Buffering Service Pre/Post alarm image can be stored in the system memory so that user can remotely connect the server and playback stored image at any time. 5.1 Alarm Buffering Service Configuration 1) Go to Advance Service menu in the service configuration mode and set up system memory assignment for Alarm Buffer service. 2) Select “Buffering Service” option and check whether Pre Alarm buffer size is already assigned.
Network Camera Server User’s Manual memory. Otherwise no pre/post alarm image can be stored. 5.2 Playback of Pre/post alarm Image Once Alarm buffering service configuration is correctly done and pre/post alarm image is stored, any stored Pre/post alarm image can remotely playback through admin window. 1) Click Alarm Buffering Service menu from the Advance Service configuration menu Preview Single Images: This is to view image one by one.
Network Camera Server User’s Manual Application Idea If you would like to download buffered images and save them in Client PC, please contact your vendor or manufacturer to get in-depth technical documentation. 6 Sensor Notification service Sensor Notification service is to send alarm trigger information to third party application program through CGI Patch. This option is to invoke third party application program upon receipt of sensor information from FlexWATCHTM server.
Network Camera Server User’s Manual Utilities Utilities is to manage and control system properly. Save Configuration, Flash Update, System Reboot and system upgrade options are provided. 1 Save Configuration This is to save all new configuration and settings in the system memory. Once new configuration is saved by “Save Configuration” menu, new configuration will permanently saved in the system memory only after system Reboot or system power off 2 Reboot Reboot means restart system.
Network Camera Server User’s Manual logics for system configuration, since executing this option Except Network configuration will lose all of your setting. 4 System Update System update can remotely be done through web page of the system or ftp option with telnet and Hyper Terminal mode. In this user manual only web based system update method is described and ftp based system update method can separately provided. 4.
Network Camera Server User’s Manual All (kernel, RAM disk, System, Web) Update: To completely update all the system for Kernel, RAM Disk, System and Web all together except PTZ Device Driver or Sensor Device Driver. This option is recommended if there is special notice by manufacturer. Generally complete system update comes only when there is big change for all of the system software. System and Web Update: To update system and web related software together. This update can be common to update the system.
Network Camera Server User’s Manual supported by the system, it can separately uploaded into the system without other software change. Sensor Device Driver : Serial input device driver can separately be uploaded into the system so that independent Serial input device can work with FlexWATCHTM Server. 4.2 Update Procedure Step by step procedure is provided by the system which means, each file will separately uploaded one by one.
Network Camera Server 11) User’s Manual Once update is successfully done following result will come up. 12) If you want to update RAM Disk, System and web page, please click “Next” button follow the web guide to update more files. 13) If all of file update is finished “System Reboot” window will come and do system reboot to apply new update. 105 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual 106 - INTPLUS [2005] - Seyeon Tech Co.
Network Camera Server User’s Manual Warranty Product Network Video Server Model FlexWATCHTM 1110L / 1110LW S/N A/S Seyeon Tech Ltd. +82-2-3017-0866 2 year Limited www.flexwatch.com Warranty Seyeon Tech Co., Ltd. TEL : +82-2-3017-0855 FAX : +82-2-3017-0843 http://www.seyeon.co.kr http://www.flexwatch.com A/S Center: Tel : +82-2-3017-0855 Fax: +82-2-3017-0843 107 - INTPLUS [2005] - Seyeon Tech Co.
