User`s manual

FW2170 User’s Manual
M4067-00 27 Seyeon Tech Co., Ltd
8.2.1. Transparent Mode
When there are two FlexWATCH™ Servers present on the network, they can act like a transparent
interface between two different UART devices so that the communication between the UART devices can be
made transparently without a flaw.
 Line Mode: The type of communication protocol
 Baud Rate: Data transfer rate
 Data Bit: The number of bits in data
 Stop Bit: The number of stop bit
 Parity Bit: Parity bit characteristic
 Network Protocol: The type of protocol used to send data
 Peer IP: IP address of other FlexWATCH™ server
 Network Port: Network port number of the server
 Data Start Pattern: Data start pattern (Not used if unchecked)
 Data Size: Data size in single transfer (Not used if unchecked)