User`s manual

FW2170 User’s Manual
M4067-00 25 Seyeon Tech Co., Ltd
Option Details for Display Output Device Configuration are as below.
 Display Output: Composite, Component, HDMI
 Video Output Format: NTSC, PAL
 OSD Service: Turn on, Turn off
 OSD Menu: Motion Status, Connection, Channel Name, Time, PTZ Status
 Audio: Disable, Listen Only, 2Way
 Initial Channel: Ch1, Ch2, Ch3, Ch4, Rotation
Single Channel Rotation Channel
 Dwelling Time (sec): The Default value is7 ( 7~300)
7.1.1. Channel Configuration
You can configure each of channels as below. Also you can add more Channels up to 4 Channels for
viewing and controlling Cameras coincidentally connected to FW2170.
Option Details for Channel Configuration are as below.
 Service: The choice of using Channel Service or not
 Name: Designation of the name of Channel connected to FlexWATCH™Camera.
 IP Address: IP address of FlexWATCH™ camera connected to server.
 Service Port: The default value is 80
 VS Module ID: The default value is 0
 Camera Number: The number of the Camera connected to FW2170
 Login ID: ID for connecting to Admin. of FW2170
 Login Password: Password to login
 Confirm Password: Affirmation of the Password you entered
 Display Mode: The type of display