User`s manual

FW2170 User’s Manual
M4067-00 23 Seyeon Tech Co., Ltd
First, select Enable to use the feature. Then enter the address of the SMTP server which is needed for
email service. If your SMTP server requires a user ID and a password for authentication, you will have to get
them from ISP or network admin. Enter the ID and password.
In Sender field, enter your email address or other meaningful words that will show the message was
sent from the FlexWATCH™ server as a notification. Now enter the email addresses of the recipients in the
Recipient fields, up to 3 persons. In the User-Defined Message box, you may put a message to explain
why the message was sent. After finishing the setup, click “Apply” to save settings.
6.5.
Mail Notification
Enable: Send email
Disable: Do not send email
SMTP Server
SMTP Server address for email service
Authentication Login
Enable: user ID and password are required for SMTP
server
Disable: user ID and password are not required
User ID
User ID for SMTP server
Password
Password for SMTP server
Sender
Email address of Sender
1st / 2nd / 3rd Recipient
Email Addresses of the Recipients (up to 3 persons)
User Defined Message
Message to be included in the Notification email