User`s manual

FW2170 User’s Manual
M4067-00 21 Seyeon Tech Co., Ltd
click apply for saving settings. After “Apply”, program will ask closing web browser for updates, which will
take 20~30 seconds. If “Back” button is pushed while configuration, all values will be discarded. If “Refresh”
button is pushed, the program will load previous values.
6.1.2. DHCP Client Configuration
For DHCP, DHCP server must exist in the network environment. Select DHCP Client from Network
Configuration, click “Apply”.
6.2. Network Ports
In this configuration, you set up the HTTP port for FlexWATCH™ Server to communicate with the
Client PC. HTTP Port is the network port that is used when a Client PC connects to the FlexWATCH™
Server’s Web page. It can be assigned between 80 and 65535 and the default value is 80.
Note: If the HTTP port number is changed to other value than default (80), make sure
the new HTTP port number goes together with the FlexWATCH ™ Server's
Internet address. For example, when FlexWATCH ™ ’'s IP address is
192.168.1.00 and set the HTTP port to 8080, you will have to enter
http://192.168.1.100:8080 to connect to the server.