User`s manual

FlexWATCH Admin User’s Manual
M4029-08 98 Seyeon Tech Co., Ltd
The next window is for locating the RAM Disk Update file.
Go through the same steps as in Firmware Update, and do the same in update process for System and
Web Update files.
After all the update processes pare finished, the window for Factory Default is displayed. If there was no
problem in the entire update processes and you want to continue, click Next button. If you’re not sure
about the system update, you can restore the Factory Default condition by clicking Factory Default
button.
Now the final confirmation window will appear. Click Reboot button and the system will reboot.
1.1.2. System and Web Update
Click the Start button next to System and Web Update item on the menu, and a confirmation window
will appear. Click OK button to proceed the update, otherwise click Cancel.
Go through the same steps as in All Update process (Kernel and RAM Disk updates are not made here).
After update is done, click Reboot to start the system over.
1.1.3. Web Only Update
Click the Start button next to Web Only Update item on the menu, and a confirmation window will
appear. Click OK button to proceed the update, otherwise click Cancel. The rest of the process is the
same as in All Update part. After update is done, click Reboot to start the system over.
1.1.4. PTZ Device Driver Update
When adding a new PTZ model that doesn’t have a proper driver found in FlexWATCH Server, it is required
to install a driver for the PTZ function. The name of the file used in update process is PTZModel.bin.
Click the Start button next to PTZ Device Driver Update on the menu, and a confirmation window will
appear. Click OK button to proceed the update, otherwise click Cancel. The rest of the update process is