User`s manual

FlexWATCH Admin User’s Manual
M4029-08 95 Seyeon Tech Co., Ltd
Configuration on Utilities menu. The confirmation screen will be displayed as shown below. Click Save
Configuration button to finalize the action, otherwise click Back button to cancel it.
In some FlexWATCH models which automatically save the configured contents, Save Configuration
button will not be displayed.
8.3. Reboot
It is recommended to reboot the system after making changes and saving the configuration. To reboot,
click Reboot on Utilities menu. A confirmation screen will be displayed as shown Click Save
Configuration button, otherwise click Back button to cancel the rebooting.
The second confirmation screen will be shown. This is only to confirm closing of web browser that
FlexWATCH Server is on. Click OK button to close the web browser and reboot right away. If you click
Cancel, the web browser is still open, but you will not be able to access the FlexWATCH Server until the
rebooting is finished.
8.4. Factory Default
Whenever it is required to restore the configuration of Camera setup to factory default condition, you can
do it here. Network configuration is not affected by this action.
Click Factory Default on Utilities menu. A confirmation screen will be displayed as shown Click Factory
Default button, otherwise click Back button to cancel it. The second confirmation screen will appear. Click
OK button to restore the factory default condition right away. If you click Cancel, web browser will go
back to the previous screen without any change made.