User`s manual

M4029-08 91 Seyeon Tech Co., Ltd
let you to replace the HDD, click Pause at full and then select Pause at Full.
• Circulation: The base file size for video is 630 Mbytes in HDD. So every time the HDD is out
of space, it will delete the oldest 630 Mbytes file to make space.
• Pause at full: When the HDD is out of space, it will stop recording and display STOP status.
The capacity information of a HDD can be sent to you by email, so you can be aware of the
HDD capacity information before it’s full.
You can set a time limit on how long the recorded video will be kept in the hard drive by putting a
check on Restrict Duration. If chosen to use, a time setting menu will be enabled to enter in days.
The default is 90 days and it can be changed between 1 and 3650. For instance, if it’s set to 3 days,
only the video since the 3 days ago will be kept.
7.6. HDD Status Report
If it is configured here, the capacity information of HDD can be sent by email. This feature is very
useful when Recording Mode is set to Pause at full, so that you can prevent a service interruption
by full HDD.
Click HDD Status Report on Recording Configuration menu. Set the condition of HDD status for
sending email, and Date/Time when email is sent.
Now enter the email addresses to receive the email and the contents of the notification.
Disk Full Notification Select Enable to use this feature.
Periodic Notification
Select Enable if you want to receive the HDD capacity information on
specific Day of week and Time.
Day & Time
Set the Day of week and Time you want to receive email notification.
(Above Example: Receiving HDD capacity information at 3 pm every
Monday and Wednesday)
HDD Error Notification Select Enable if you want to receive a notification upon HDD Error.
HDD Error Beep Sound Select Enable if you want to sound Beep upon HDD Error.