User`s manual

M4029-08 86 Seyeon Tech Co., Ltd
Category Item Description
Select Mode
Always Recording is enabled all the time.
Schedule Only Recording is done by configured schedule.
Event Only Recording is controlled by configured event.
Schedule and Event Recording is controlled by both schedule and event.
Schedule
Week Set day of week
Time Set time
Date Set date
Event
Alarm Sensor
Each of 1, 2, 3, 4 refers to the sensor number, and
checked when Event-Driven Recording is selected.
If all the four sensors are checked together, recording is
enabled only when all four sensor are activated.
Motion Detection
Each of 1, 2, 3, 4 refers to the sensor number, and
checked when Motion Detection Recording is selected.
If all the four sensors are checked together, recording is
enabled only when all four sensor are activated.
When Hardware motion detection is used, you should set
the detection area in Camera & Motion section.
Camera Connected Recording is enabled when camera signal is detected.
Camera Disconnected Recording is enabled when camera signal is not detected.