User`s manual

M4029-08 85 Seyeon Tech Co., Ltd
Up to 4 different recording conditions can be set per camera. All the conditions are checked by OR
logic, so it will start recording when at least one of the conditions is met. To set a condition, click
Condition 1, then Condition setup screen will be displayed.
Item Description
Condition 1~4 Set the conditions for recording
Graphs for Time, Day of week,
Alarm, Motion, Camera Connection
Graphic displays of conditions for recording
Recording Service Click Enable to record the video. Click Disable otherwise.
Server Module ID Server ID number of the added VS Module ID (IP Devices).
Camera Number Camera number to select.
Camera Name
The name of the camera selected. Use up to 31
alphanumeric or 15 Unicode characters.
Pre-Recording Speed
Recording speed before Event. Valid only when Recording
condition is set to Always or Schedule.
Pre-Alarm Count
The number of frames stored before Event. Up to 5 frames.
Valid only for Event-Driven Recording.
Post-Recording Speed
Recording speed after Event. Valid only when Recording
condition is set to Event-Driven Recording.
Post-Alarm Count
The number of frames stored after Event. Up to 5 frames.
Valid only for Event-Driven Recording.