User`s manual

M4029-08 84 Seyeon Tech Co., Ltd
Below is an example of configuring the motion detection-triggered recording for FW5450 model. It
starts by clicking Recording Configuration.
It displays the information of the recording-capable servers such as VS Module ID (IP Devices),
Server Name, Server IP Address, Service Port Number, Vendor, Camera Name, and Record ability. To
configure, select a camera according to your need.
Below is the Recording Configuration screen when Camera 1 is selected from Module ID (IP
Devices) 0, which is attached to the FW5450 device.
Click on Camera 1, and it will display the screen for detailed configuration such as recording speed,
camera name, Pre- and Post-alarm image speed. After configuring them properly, click the Save
button to save the change.