User`s manual

M4029-08 83 Seyeon Tech Co., Ltd
After formatting is finished, the following window will appear informing it. Click the OK button.
On SD Status & Format window, you will be able to see that the 1
ST
SD is shown formatted. After
formatting SD card is finished, click the Reboot button to restart the system.
After about 30 seconds, the system will be rebooted. You will be able to see the following information
when you log in to the Admin web page of the FlexWATCH server.
7.3. Recording Configuration for FW5050/5071/5450/5850 &
FW1170/1173/1175/1176 with microSD Slot
Each camera can be configured for recording option in this section. Configuration items include
motion detection recording, 24-hour continuous recording, event-driven recording, and etc. If other
vendor’s products are added in the previous IP Devices Registration section, those cameras’ video
can be also recorded in your device.
You can find out the list of servers with recording capability by clicking Recording Configuration.
For example, you will see 12 channels from the list of VS Module ID (IP Devices) after adding two
FW3450 devices in IP Devices Registration of FW5450. That means, FW5450 can record the video
sent from other remote cameras, as well as the four local cameras attached.