User`s manual

M4029-08 82 Seyeon Tech Co., Ltd
Now you will see the list of SD cards available and whether they are formatted or not. To perform
formatting the unformatted one, click the SD card.
Then the following window will be displayed.
Click the Partition and Format button, then a pop-up window will be shown to confirm the
formatting. Click the OK button to proceed, or click the Cancel button to abort the formatting.
Note: If the program is terminated during the format process, the SD card may be
damaged. To avoid this problem, make sure to close the program in the right
manner and check the SD card.