User`s manual

M4029-08 79 Seyeon Tech Co., Ltd
If you put check mark on Check Bad Block option, it’ll take much longer time to complete the
formatting process. In case of installing a new hard drive, it’s not necessary to use that option.
Click Partition and Format button, then a confirmation window will be displayed. Click OK button
to proceed formatting, otherwise click Cancel button. The progress of formatting will be displayed as
below.
When formatting is finished, a notification window is displayed. Click OK button.
Note: If an abnormal termination is happened during the formatting process, it is possible
for the hard drive to be defected. Make sure to complete the process properly.