User`s manual

M4029-08 75 Seyeon Tech Co., Ltd
6.1.4. Sensor Notification Service Configuration
Item Description
Input 1 - Input 4 Select which input to set up for Sensor Notification Service
Service Select Enable to use Sensor Notification. Otherwise select Disable.
Service Mode Select network mode for CGI. Select one among HTTP, TCP, or UDP.
Main IP address Enter IP address to use in CGI or other functions
Aux1 ~ Aux 3 IP address Enter 3 more addresses to use in CGI or other functions if needed.
Port Enter port number for CGI or other functions. Default is 80.
CGI Path or
Alarm Common Message
Enter CGI Path for CGI or other functions.
User ID Enter User ID to log in.
Password Enter Password for the User ID to log in.
After finishing the configuration, click Save button to apply the change and continue to the next page.
Clicking Back button will cancel the changes and go back to the previous page.