User`s manual

M4029-08 61 Seyeon Tech Co., Ltd
EXIT Exit from Menu Mode and save settings.
Special Menu Function Description
CAMERA ID (Name of the camera) Use up to 15 Alphanumeric and space
COLOR AUTO / ON
AUTO: Automatic switch of Day & Night Mode
(Day-time: Color Mode; Night-time: B/W mode)
ON: Operate in COLOR mode always.
SYNC INT / LL
LL: Adjustable between 0 - 359º
Trigger Signal: Auto Sensing.
Motion
Detection
OFF / ON
ON: Define 4 adjustable positions and sizes.
When any motion is detected, it displays MOTION
DETECTED on the screen.
PRIVACY OFF / ON ON: Define 4 positions, sizes, contrasts.
MIRROR OFF / ON Mirroring (Horizontal Image reversing)
SHARPNESS OFF / ON Adjustable between 0 - 31.
RESET Reload the factory default condition.
RETURN Return to SETUP menu after savingsettings.
5.4. DI (Sensor Input) / DO (Alarm Output)
Select DI/DO from Device Configuration menu to configure Sensor Input and Alarm Output. After
the setting up, select DI Status/DO Control on Device Configuration menu to configure the
behavior of those Input and Output ports.
DI/DO functionality can be set to either Normal Open or Normal Closed type as follows.
• Normal Open Type: Normal is OPEN, and goes CLOSED when triggered by an event.
• Normal Close Type: Normal is CLOSED, and goes OPEN when triggered by an event.
5.4.1. DI/DO for FW3450/FW5470
There are 4 serial Input ports and 4 output ports in FW3450 and FW5450. A good example of the
Input and Output usage is, an external sensor can be connected to the Input port, and a warning
light is triggered by the Output port.
DI/DO Setup
DI/DO Setup DI/DO Control
Note: Make sure the type of the sensor and use it correctly to the type. If a Sensor Input
is not used, it must be set to Normal Open Type to avoid a false input.