User`s manual

M4029-08 56 Seyeon Tech Co., Ltd
quality.
• Hue: Set the color of image between -100 and 100 (applicable to Primary Stream only)
• Saturation: Set the intensity of the image between -100 and 100 (applicable to Primary Stream
only)
• Contrast: Set the contrast of the image between -100 and 100 (applicable to Primary Stream
only)
• Brightness: Set the brightness of the image between -100 and 100 (applicable to Primary
Stream only)
• Motion Sensitivity: This value sets how sensitively the motion detection works for the motion
detection functionality. It can be between –100 and 100 while 100 is the most sensitive.
• Motion Detection: This decided whether the Motion Detection is to be used. If Enable is
selected, you can set which part of the camera image the Motion Detection does functioning.
(applicable to Primary Stream only)
After configuration is finished, click Apply button to save the setting. If you click Default button, the
entire configuration will be reset to the original values.
5.3.4. Camera & Motion for FW3870/5870
This menu is used to set up the selection of video format, data added to video data, encryption of
video, and etc. Click Built-in Module 0 or Built-in Module 1 on Device Configuration menu, and
then click Camera & Motion.
Configure the video data format and other information to be contained in it.
• Default Video Format: Video transmitting format of the camera attached to FlexWATCH Server.
Select one from NTSC or PAL.