User`s manual

M4029-08 53 Seyeon Tech Co., Ltd
• Motion Sensitivity: This value sets how sensitively the motion detection works for the motion
detection functionality. It can be between –100 and 100 while 100 is the most sensitive.
• Motion Detection: This decided whether the Motion Detection is to be used. If Enable is
selected, you can set which part of the camera image the Motion Detection does functioning.
(Primary Stream only)
After configuration is finished, click Apply button to save the setting. If you click Default button, the
entire configuration will be reset to the original values.
5.3.3. Camera & Motion for FW3470/FW5470
This menu is used to set up the selection of video format, data added to video data, encoding speed,
audio control, image resolution, video quality, motion detection, and etc.
• Default Video Format: Video transmitting format of the camera attached to FlexWATCH Server.
Select one from NTSC or PAL.
• Video with UART sensor Data: If Enabled, video data will contain UART sensor data from
COM port.
• Video with user defined message: If Enabled, video data will contain the user-defined data.