User`s manual

M4029-08 52 Seyeon Tech Co., Ltd
Image Quality Setup
In Image Quality level setup, selecting the left results in higher image quality, but requires higher
network bandwidth. Selecting the right requires lower network bandwidth, but gives decreased image
quality.
Camera Control
Click Camera Control on the bottom of Camera & Motion Configuration menu.
• Hue: Set the color of image between -100 and 100.
• Saturation: Set the intensity of the image between -100 and 100.
• Contrast: Set the contrast of the image between -100 and 100.
• Brightness: Set the brightness of the image between -100 and 100.
Motion Detection
Click Motion Detection on the bottom of Camera & Motion Configuration menu.
H.264
Rate Control Mode: VBR (Variable Bit Rate)
Video frames are encoded with selected image
quality and GOP. Encoded frames have
different data size from each other.
Image Quality: one of 6 quality levels
(Low Compression / Highest / High
Normal / Low / Lowest)
GOP Structure: Distance between I-
Frames. That is filled with P-frames.
Rate Control Mode: CBR (Constant Bit Rate)
Video frames are encoded with selected image
quality and GOP. Encoded frames have the
same data size as other frames. Due to the
constant bit rate, it has better stable
transmission performance.
Bit Rate Control: Total number of Bits
encoded per second. The higher Bit Rate,
the better image quality. Can be set
between 32kbps and 2Mbps.
GOP: Distance between I-Frames. That is
filled with P-frames.
M-JPEG -
Image Quality: one of 6 quality levels
(Low Compression / Highest / High
Normal / Low / Lowest)
Low
Compression
Highest High Normal Low Lowest