User`s manual

M4029-08 49 Seyeon Tech Co., Ltd
• Exposure Back Light: Enable or disable back light.
• Exposure WDR mode: Enable or disable WDR(Wide Dynamic Range) mode.
• Sharpness: Select the sharpness of image between 0 and 15.
• Maximum Digital Zoom: Select Off, x2, x4 or Max.
• View Angle Flip(Picture): Enable or disable flip.
• View Angle Tilt Limit: Select from -5 to 10.
• System Auto Calibration: Enable or disable auto calibration.
• Installation Environment: Select Normal or Desk-top.
• Preset Freeze: Enable or disable preset freeze.
• PTZ Speed: Select Slow, Medium or Fast.
After all the setting is done, click Apply button to save it. If Default button is clicked, all the fields
return back to original value.
Motion Detection
• Motion Detection: If enabled, Motion Detection feature is activated and user can configure the
areas where motion detection function will work. (this is only available in Primary Stream)
• Motion Sensitivity: Set the sensitivity of motion defined in Motion Detection Area. Select
between -100 and 100. 100 is the most sensitive.
After all the setting is done, click Apply button to save it. If Default button is clicked, all the fields
return back to original value.
5.3.2. Camera & Motion for FW3170/FW1173-DS/FW1175-DS/FW1176-DS/FW1177-
DE/FW1178-DP (All “-E” model)