User`s manual

M4029-08 46 Seyeon Tech Co., Ltd
• Power Frequency: Select NTSC (60Hz) or PAL (50Hz) according to the region.
• Lens Type: DC Iris or Manual Iris can be selected.
• Brightness: Select the brightness of image between 0 and 256.
• Contrast: Select the contrast of image between 0 and 30.
• Sharpness: select the sharpness of image between 0 and 5.
• Day & Night Control: If used, the image will be in Color mode during daytime and Black&
White mode during night time.
• The threshold of day to night: This is the point of transition from Day to Night mode. Select
between 1 and 32, and lower the value the earlier the transition point.
• The threshold of night to day: This is the point of transition from night to day mode. Select
between 1 and 32, and lower the value the earlier the transition point.
• Manual Shutter Enable: If enabled, the shutter speed will be selected manually. If disabled, it
is controlled automatically.
• Manual shutter Speed: Select the shutter speed of camera between 1/30 and 1/24000.
• Video Output: Video output (NTSC/PAL) is enabled. (applies only on some models)
• Vertical flip: If enabled, flip the image vertically.
• Horizontal flip: If enabled, flip the image horizontally.
After all the setting is done, click Apply button to save it. If Default button is clicked, all the fields
return back to original value.
Camera Control for FW1170-VO, FW1174-VC (All “-E” model)
Select Camera Control on the bottom of Camera & Motion Configuration menu.