User`s manual

M4029-08 44 Seyeon Tech Co., Ltd
• Video with Flexible Extra System data: If Enabled, video data will contain Flexible Extra
Data from COM port.
• Video with user defined message: If Enabled, video data will contain the user-defined
data. (Reserved Field)
• Video with PPP status: If Enabled, video data will contain PPP connection status.
• Video with camera name: If Enabled, video data will contain the camera name.
• Video with server name: If Enabled, video data will contain the server name that you
defined.
• Video with IP address: If Enabled, video data will contain the IP address of the video server.
• Audio: Select if Audio function is to be used (applies to Primary Stream only). FlexWATCH
Server provides 2-way audio streaming by combining microphone input with video data. Users
can listen to the streamed audio on PC speakers.
• Frame Rate: For Primary Stream, this is the number of frames compressed in every second.
You can control the network traffic with this parameter. For Secondary Stream, it can be set to
manner of 1/2, 1/4, 1/8... of the primary stream.
• Image Size: Select the resolution of each channel’s video
• Encoding Standard: Select the compression method of each video, either M-JPEG or H.264
format. It is not allowed to set both channels to M-JPEG.
To save the setting, click Apply button.
Camera Configuration
On the lower part of Camera & Motion Configuration menu, select a channel to configure.