User`s manual

M4029-08 38 Seyeon Tech Co., Ltd
Enter the Preset names as required. You can make up to 32 Preset names. Below is the example of
entering 4 different room names.
Use the buttons to configure Preset, OSD, Swing, Group, and Tour. (Swing, Group, and Tour are
supported in FW1177PE and FW1178PE)
• Preset & Menu: You can pre-define the spot you want to see. Up to 32 settings can be stored.
Click Menu button to configure the camera’s attributes.
• Swing: Repeat moving between two positions in certain period.
• Group: Each group moves around up to 6 pre-defined positions in certain period.
• Tour: Move around up to 6 different groups in certain period.
Preset & Menu
Click on the button and it will display the video window as shown below. Use PTZ to control the
camera to show the desired spot. Select the Preset number you’d like to assign to it. Click Set button
to save the preset values in the Preset number.
• Mode: When Step is selected, it will move as much as pre-defined distance. When Continuous
is selected, it will keep moving as long as the button is being pressed.
• Speed: In Step mode, different Speed value is different Step size. In Continuous mode, it is
different moving speed.
Click on Menu button, and it will display an OSD window for adjusting camera attributes. OSD setting
can be made by Up, Down, Left, Right arrow keys. After setting is finished, click Menu button.