User`s manual

M4029-08 34 Seyeon Tech Co., Ltd
5.1.3. Transparent Mode
When there are two FlexWATCH Servers present on the network, they can act like a transparent
interface between two different UART devices so that the communication between the UART devices
can be made transparently without a flaw.
• Line Mode: The type of communication protocol
• Baud Rate: Data transfer rate
• Data Bit: The number of bits in data
• Stop Bit: The number of stop bit
• Parity Bit: Parity bit characteristic
• Network Protocol: The type of protocol used to send data
• Peer IP: IP address of other FlexWATCH server
• Network Port: Network port number of the server
• Data Start Pattern: Data start pattern (Not used if unchecked)
• Data Size: Data size in single transfer (Not used if unchecked)
5.1.4. PTZ Mode
With the PTZ camera’s RS-485 cable wired to FlexWATCH Server’s COM or AUX port, select the proper
PTZ model in PTZ Mode Configuration screen, then click Apply button to save the change.