User`s manual

M4029-08 33 Seyeon Tech Co., Ltd
The following example is when a speed sensor, AGILIS-HE820-SINGAPORE, is selected.
Upper Limit: The highest value in the range to assign
Lower Limit: The lowest value in the range to assign
Initial String Length: The length of initial string from sensor
Initial String Data: The initial string from sensor
(Speed) Delay: select Enable if sensor input needs delay
Internal process delay: The amount of delay for sensor input
Sensor Aiming Position: The position for sensor to aim
Camera Aiming Position: The position for camera to aim
Add Vehicle length to calculate delay time: The length of vehicle for applying delay time
5.1.2. Serial Output Mode
Using Serial Output Mode, you can send UART device commands to FlexWATCH® Server in order to
control PTZ devices, Multiplexer, Access control box, X10 Protocol, z256 protocol by RS-232 or RS-
485/422 communication. In the picture below, serial output mode can be selected among By-Pass,
X10, or Z256.