User`s manual

M4029-08 29 Seyeon Tech Co., Ltd
4.9. RTP/RTSP Setup for Cameras and FW3170
RTSP (Real-Time Streaming Protocol) is a protocol to transfer video and audio stream over the
network. Any application supporting Standard RTSP can be used for FlexWATCH server. Quick Time
Player or VLC program can be used for this, but it may not be supported in the environment within
firewall. There are two types of usages, one for Unicast address condition and the other for Multicast
address condition.
For Unicast Address:
Use “rtsp://network video server ip address/cam0_0”. If there are multiple channels, use
cam0_x, x (0~3) with each number applied. If there are multiple modules, use camx_0 x (0 ~ 3) with
each module number applied.
For Multicast Address:
Use “rtsp://network video server ip address/mcam0_0”. If there are multiple channels, use
mcam0_x, x (0~3) with each channel number applied. If there are multiple modules, use mcamx_0 x
(0 ~ 3) with each module number applied.