User`s manual

M4029-08 28 Seyeon Tech Co., Ltd
found from IP-CCTV DNS Setup menu. Enable service and click Apply. If it is configured properly,
you can check the result by clicking Confirm button.
.
4.8. Port Forwarding & UPnP
UPnP(Universal Plug and Play) is a kind of network protocol to help users to find and configure
network products in same local network area. Port forwarding is to assign a certain network port to a
network product Proper so as users can access it from outside of Local Area Network. Generally, port
forwarding can be configured from network router.
UPnP port forwarding is made up with finding available network port, assigning it to a FlexWATCH
product and reporting overall network configuration of a FlexWATCH product to IP-CCTV DNS server.
Users have to register products to IPCCTVDNS server and IP-CCTV DNS service should be enabled.
There are 3 options in UPNP Port Forwarding.
• Manual: User Assigned Port is used when users can access network router(hub) and manually
assign available network port to FlexWATCH products. In this case, users have to type already-
assigned network port under User Assigned port
• UPnP: User Assigned Port is used when users want FlexWATCH products to configure port
forwarding menu of network hub with user-assigned network port. If it fails, try to change user-
assigned port
• UPnP: Auto Selected Port is used to let FlexWATCH products deal with all network
configuration automatically..
Please notice that network router should support UPnP Port Forwarding and there is a limit for
maximum UPnP devices. If it is properly configured, results will be appeared under UPnP status.
Note: Refer to IP-CCTV DNS™ User’s Manual for further details of the configuration.