User`s manual

M4029-08 26 Seyeon Tech Co., Ltd
4.6. Network Status Notify
This feature helps to send updated network status information to registered email address if any
changes happen. This function will work under DHCP or PPPoE.
If Network Status Notify is set to Enable, FlexWATCH Server’s network status will be emailed to a
specific person in case of the following events:
• When it is set to Dynamic IP on Network Configuration menu, and the FlexWATCH server has
been given a new dynamic IP address and connected to the network.
Or,
• When it is set to PPP Client on WAN-Modem menu, and the FlexWATCH server has been
connected to the network with ISP or PPP server.
To configure, click Network Status Notify on Network Configuration menu. The following window
will be shown.