User`s manual

M4029-08 24 Seyeon Tech Co., Ltd
For WPASK or WPA2PSK, TKIP and AES can be available and the max length of encryption key is 63
digits of ASCII.
4.3. Network Ports
In this configuration, you set up the HTTP port for FlexWATCH Server to communicate with the Client
PC. HTTP Port is the network port that is used when a Client PC connects to the FlexWATCH Server’s
Web page. It can be assigned between 80 and 65535 and the default value is 80.
4.4. Bandwidth Control Configuration
Bandwidth control is for limiting maximum network traffic. If it is enabled with certain limit, maximum
Note: If the HTTP port number is changed to other value than default (80), make sure
the new HTTP port number goes together with the FlexWATCH Server's Internet
address. For example, when FlexWATCH's IP address is 192.168.1.00 and set the
HTTP port to 8080, you will have to enter http://192.168.1.100:8080 to connect to
the server.