User`s manual

M4029-08 22 Seyeon Tech Co., Ltd
For static IP, select static IP and input values for IP address, NetMask, Gateway, DNS1, DNS2 and
click apply for saving settings. After apply, program will ask closing web brower for updates, which
will take 20~30 seconds. If Back button is pushed while configuration, all values will be discarded. If
Refresh button is pushed, the program will load previous values.
4.1.2. DHCP Client Configuration
For DHCP, DHCP server must exist in the network environment. Select DHCP Client from Network
Configuration, click Apply.
4.1.3. PPPoE Configuration
PPPoE is used to connect FlexWATCH products to PPPoE modem provided by ISP. Since PPPoE needs
verification, ID and password are necessary to access network. Type ID and PW.
4.2. Wireless LAN Configuration
To use wireless LAN function, detailed information of AP (Access Point) such as ESSID, Auth Mode,
Encryption, etc should be exactly provided. Please make sure that wired LAN and wireless LAN will
work exclusively.
Static IP and DHCP client will be available for wireless LAN. When PPPoE is selected, wireless LAN is
disabled. Even though LAN cable is unplugged, wireless LAN won’t be enabled.
Wireless LAN models will show additional options under Network Configuration menu.